Recent content by addle

The Timer no longer operated the dryer except for low heat. So I opened it up to see what the problem was. I did not see anything so I put it back together, incorrectly. When I started up the dryer I saw a spark from the timer and the dryer did not turn back on. Whoops. So I thought I might...

Kenmore 11087572110 gas dryer Timer is Sears Part #695369 according to sears parts.com Timer has marking M430-G on it. Ebay has timers M460-G Do you have any advice on replacing the timer?

I was offered a free 2014 Speed Queen that appears to be in very good condition. Is there any reason for me to keep my 2003 Kenmore, other than the Speed Queen is very heavy? Do you have any advice for a new owner? from appliance411.com Speed Queen AWN432SP111TW01 According to the serial...

I have been offered a used Speed Queen I was offered a free 2014 Speed Queen that appears to be in very good condition. Is there any reason for me to keep my 2003 Kenmore, other than the Speed Queen is very heavy? Do you have any advice for a new owner? from appliance411.com Speed Queen...

Dryer exhaust smelled like super hot iron. Dryer exhaust smelled like the contents were being pressed with a super hot iron. I am not an appliance expert, but! Gas and propane combustion leads to lots of hot water vapor and CO2 in the air. Adding water vapor is actually now a feature of...

natural gas produces 1.25 gallons of water per 100k BTUs If it is a gas vs electric issue maybe "Burning natural gas produces 1.25 gallons of water per 100,000 BTUH in a typical construction heater (less than 100% efficiency). " https://inspectapedia.com/hazmat/Gas_Combustion_Products.php I...

I was thinking you might avoid replacing the valve. I was just wondering why they had the repair video. thanks for answering my newbie question.

Trying to figure out what needed to be replaced in my dryer I found a video about replacing the regulator. How would you diagnose a regulator failure? How would you know if the old one is not working, the one in the video looked fine to me? The video does not advise on any adjustments...

I got a spacer, still doesn't work. I bought a used valve figuring I could use that spacer. The gas valve does not appear to have opened. I waved an iron knife over the coils. The coils appear to be activated. The igniter lights up. But then the igniter turns off. I do hear a click...

Kenmore 11087572110 gas dryer coil replacement. I watched the video below about replacement of the gas valve coils. The video claimed there was an important spacer for one of the coils. When I disassembled the coils on my dryer I was careful to look for the spacer but I did not find any...

Thanks for talking be down. I might still buy it if including delivery it drops to below $100.

Both are top loaders. I currently own: Kenmore 90 mod: 110 24932200 ser: cp0719541 I replaced a spring, frame at the bottom has significant rust, I had to put lithium grease on the rear leg balancing mechanism to stop vibrations. There was some rust on the arm that held the spring (which can...