Recent content by andyg

With grateful thanks Hi Liam and Austin, Thanks very much for the tips. Gary must be busy, so thanks for the suggestion, I'll email him direct. From what I can tell the serial numbers are identical. I was thinking of putting the old timer back to see if the machine now worked. However, I would...

Wiring of the Timer Hi All, Please can anyone help me on this timer wiring? I understand there is nothing on the Hoover website? I would really appreciate a response either yes or no - my clothes need washing !!! Thanks, Andy

Wiring of the Timer Hi All, Does anyone have any ideas on the wiring of the timer please? From one really grateful, Andy on St Andrews day.

Hi to Electron1100 re Wiring of Timer Hi Gary, Thx for the offer of help to see if you had a wiring diagram; any joy sir - I need to do some washing!! regards, Andy

James Nice to hear from you. One photo here, I have more but have to attach singularly. Andy PS. I do pray someone can help me with the wiring issue !

Gary Wow thanks again. Would you believe none of the pins holes in any of the connector strips match with the pins on the timer. The good news is that the pins on the new timer do match those on the old one. Thank you so much for offering to look at any diagrams you have. The machine is an...

Help please with Timer Hi, Well I thought I had correctly relocated the 7 blocks of connectors on the new timer but the timer is just going around so it looks like I've got this all wrong, very silly and I'm careful. So here is a photo of the side of the old timer. The seven blocks of...

Taking timer apart Hi All, Metal plate now successfully removed from old timer. I'll report on the operation of the new timer and the machine later. Regards, Andy

Getting Timer apart Hi Gary, Forgive me for the couple of days delay responding. I've got the timer out but cannot now get the metal plate off the old timer to place on the new one. The retaining screws are under the bevelled plastic that links with the control wheel - a real conundrum. I've...

Hi All, Does anyone have any comments please on post 9 above re water inlet valves? Could it be the programmer after all and if so does anyone know how I fit that per my post 1? Thanks once again, Andy

Hi Gary, thanks. No the water supplies aren't connected now. You're right that the water will not cut off per my post 2 above. Can I take off the valves and clean to fix this problem or do I need to buy new H & C inlet valves? Is this foxing the programmer into thinking there isn't enough water...

Hi Austin and Rolls, Sorry chaps but this doesn't appear to be the problem. I took off the opaque bottle and the end of the red tube on the pressure switch. I could blow down easily. There was only a small amount of gunge around the edge of the opaque bottle which I've cleaned out along with any...

Wow thanks so much to everyone particularly Rolls rapide. As I've bought the timer it looks like I will have to go back to Hoover cap in hand and see if they will accept returns and refund me. I've never used one of these forums before so it just shows I should have tried here first. I'll...

Hi Austin, Thanks for the reply. I'm an amateur here so forgive me as I don't understand what you are talking about. However, in saying the water didn't cut off the last time I used the machine I used pro L, Gentle refresh and water came in but didn't stop and I had to turn the electricity off...

Hi, I own a Hoover Ecologic washer dryer 1300 and it's been a great machine but the water doesn't now cut off when filling. I believe the timer/programmer is faulty. Hoover have been great and I've been able to purchase a replacement part from them for sensible money. However, I'm rather...