Recent content by andyvivo

Hi Definitely in stock at spares4appliances, pop them an email [email protected] Andy

Chris, Have you lifted the agitator off and checked the sump hose guard? Andy

And this nice Servis version http://www.ebay.co.uk/itm/Small-3KG-Servis-Tumble-Dryer-Model-no-2154-/190783175127?pt=UK_Home_Garden_Kitchen_Washing_Machines_Dryers&hash=item2c6b9039d7

Hey guys, this might be of interest for someone? http://www.ebay.co.uk/itm/Vintage-retro-English-Electric-tumble-dryer-/321052645107?pt=UK_Home_Garden_Kitchen_Washing_Machines_Dryers&hash=item4ac03a96f3

Hi For anyone with a Dyson washing machine, they are discontinuing servicing and spare parts of these machines. Dyson will not be accepting service calls after the 7th of December, so if you have one, it may be worthwhile getting them in. Andy

Of the three pins and the metal plate, you should get a circuit between the two outer pins, and nothing between the outer pins to the middle pin / metal plate. You should also get a reading from the middle pin to the plate, and again nothing to the outer pins. To do this you would need to...

on the electronic pcb, there is a little 3 legged device (triac) that is either clipped or screwed to the heat sink (the metal shell) This allows the correct supply to feed / regulate the motor speed.

Would say the triac is open circuit, attached to the heat sink of the module. The overfilling i would say is a blocked pressure chamber

and there is this Hotpoint, not sure what name it was http://www.ebay.co.uk/itm/old-1950s-hotpoint-washing-machine-working-cream-colour-with-mangle-wringer-/320940379319?pt=UK_Collectables_Kitchenalia_RL&hash=item4ab9898cb7#ht_962wt_1185

Remove one of the lifters and see if you can spot anything

Check the filter flap for the rating label, the serial numbers first digits are for example 9910***** week 10, 1999 200215*** week 15, 2002

oh and check the loo seat on page 11, wtf??? lol

There is two knobs behind the door, they are removable dispensers. In the link there is a document download, powerpoint required. http://www.daewoo-electronics.ro/en/washing-machines/front-loading/mini_d_-wall-mounted-69.html?page=download#tabs

Hmmm I may see how much a cr02 control panel is......

IIRC the machine powers door open or closed, I can't remeber if these had two dashes when the door was open or just remained at 00 or whatever programme was selected.