Recent content by antiquetvguy

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

  1. A

    Kitchenaid KDM21 overheat

    After much time doing observation the darn dishwasher failed again. This time I was able to watch the timer to see if it had a problem. I discovered that the ratchet pawl that advances the toothed main cam gear, was evidently sticky and the pawl was not engaging with the toothed gear. So the...
  2. A

    Kitchenaid KDM21 overheat

    Trouble shooting Overheat Update Reading the manual for the Monterey 21 I got some information on the operation of the water heating cycles. During normal water heating, the tub fills without pump re-circulation. When the water is heated up to temperature (140 degrees) the heating element...
  3. A

    Kitchenaid KDM21 overheat

    Thanks! I will report back when the new parts arrive and I install them.
  4. A

    Kitchenaid KDM21 overheat

    Thank you, your input about the separate fan heater. That gives me more food for thought. I am going to run another full cycle to verify that it was in drying cycle when I found the red hot water heater element. However the heating element is remaining on during the water heating part of the...
  5. A

    Kitchenaid KDM21 overheat

    My Kitchenaid KDM21 Monterey went into the final dry cycle today and I started smelling a burning smell. I opened the dishwasher to discover the heating element was RED HOT. I could hear the blower fan running, but evidently what ever controls the drying temperature was not cycling the heating...
Back
Top