Recent content by armeniangirl

1956 Customline door hinge Thank you. I did not see the 3d screw initially.

1956 custom line wall oven door hinge Thank you Customline for the manual pages and explanation. I copied them and will study them. Am I understanding that when the 2 inside screws (bottom and side) in the inner lining are removed, the oven pulled out and the little side panel is removed, the...

replace door hinge on Hotpoint Customline wall oven How does one access the door hinge on the top oven of a 1956 Hotpoint Customline oven. I thought the problem was the spring but it is the hinge. the roller on the hinge that the arm goes over is gone and the arm is getting pretty chewed up...

1956 custom line wall oven door spring/hinge Thank you Customline. I am appreciative of your expertise and help as always.

1956 custom line wall oven Yes Customline, I understand and agree now that a parts oven must be found. I will look now. Thank you for your patient help. If you happen to see one would you please let me know.

1956 custom line wall oven door spring/ hinge The new spring I put in to replace the original has now seized and the door will only open, again, at a 40* angle. Would anyone be able to help me find the correct sized spring and hinge for the left side of this oven? Customline had kindly sent me...

1956 custom line wall oven door spring . We were able to fashion the right size spring from a hardware store one. The door opens almost flat. It is fine enough to get a large pan slid in. But the left side door arm (cam lever)/hinge support must be binding. It creaks when the door is pulled...

1956 custom line wall oven door spring Kevin-Thank you so much for your help. I have printed all of the pictures and diagrams for when the gentleman who is helping with the repair comes. He travels over an hour to get here so I want to be extra prepared. Your information about the spring is...

1956 custom line wall oven door spring Morning, Thank you for your direction. (This may sound like a silly question but most of my repair projects involve duct tape and rubber bands so this repair is a stretch for me.) When you suggest to attach the end of the original spring to a "new" spring...

custom line oven door spring. Thank you for your help. I will check ebay since now I have an idea of the size. I will keep you updated on my process of "updating the dated"!

1956 custom line wall oven door spring Kevin, Your information and pictures are a treasure for me, thank you so much. I do not have the original cable either-perhaps it went down the shaft with the broken end of the spring. I can see from your spring picture that the spring I had gotten and...

1956 custom line wall oven door spring Thank you Customline and Combo52 for your information and help with my repair. The thermostat has been replaced and is working great. The problem with the top oven door is that the left hand spring is broken. I got another but it is not the right size...

1956 custom line Here is the oven. Got the picture to stand up !

1956 Custom Line broken door hinge Thank you for all of most helpful feedback and information. I tried to attach a picture but they are always sideways(I am working on that too.) By enlarging the diagram and your information the components became clear. The problem must be with the cable/spring...

1950s Custom line wall oven broken door hinge I am very grateful to you for posting the diagram pictures of the inner workings of the door/hinge on the oven. It helped a great deal to study these. The lever is secure on the door side, the end in the oven is loose, it easily moves up and down...