Recent content by indesitlove107

I used to love the Indesit, but now hate them. I prefer to buy the Ariston, there is a good program. Ariston Magherita 2000 is good too, as they have different types of drum rotation, and three distribution 90 rpm (like Hotpoint WMA series) but this is only on the Cotton programmes. Roman.

Indesit WIE 107. The sizes of the bearings and seal. Bearings: 6202, 6203 Seal: 22x40x10/11,5

The upper part of the washer.

On the rear cover inside the tub itself, pulley, electronic module, heater and motor.

Is the drain pump.

The motor collector between the two carbon brush

Hi Bruce, I replaced the bearings with a seal on my washer 3 months ago.

The motor of the closed type of cap but my parents also Indesit only open, if water gets it will be short circuit, but it is very rarely burn out motors the washer.

Indesit WIE107 before disassembly The motor. I photographed under the washer. Visible carbon brushes and tachometr

Indesit WIE107 before disassembly The motor. I photographed under the washer. Visible carbon brushes and tachometer.

You're not going to put the bath on Hotpoint Hotpoint WM22 WMF540G. Because this tub from WM22 is not compatible on WMF540G, there mount the motor on the left. Roman.

This machine is not bad, but only two functions "Anti-Crease" and "Rapid Wash" and no choose the spin speed.

I will tell everyone that this washer since 2004, but we were presented with in 2007.

My indesit WIE 107 Washing Machine

Hi all guys, I present my washer indesit WIE 107. My washer was purchased 7 years ago in 2007. And after 7 years it began to leak, the reason was the door seal. After replacing the door seal, the machine worked for another 4 months and after that buzzed the bearings in the drum. Unfortunately...