Recent content by ipvce

Appreciate the information. This is why it has me so puzzled. I verified the control switch and the are no burned wires or anything like it. I also tested continuity between the blade terminals on the back of the switch with the switches in the ON or OFF positions and it checks out OK. Also...

Twin Water intake valve is working properly. I can not find any other issues with the unit except the TBS thermostat is not testing for continuity. All other components test normal. With or w/o the thermostat bypassed I get the same result: With the timer on the Heavy scrub setting and having...

Door switch is working properly and stud is present. Did a bit more troubleshooting and the following is happening: With the dial in Heavy Scrubs and the Heavy Srub button cycle on: The fan unit on the side turns one for a few mins and then shuts off. No signs of water coming into the unit...

Was lucky to find a new timer that fit the unit. Replaced it in the sequence as described on the Manual. Still nothing is happening. Any thoughts? Thanks in advance.

Thank you. Will give it a try with a new timer and post back one way or the other for future reference on the forum. Regards.

Appreciate the response. I verified the door interlock switch and that appears to be working good. I feel it may be something else. The water had been shut-off from the unit and I opened the faucet allowing water to face the double fill valve unit but also no power. The other thing I did...

Hello, This is my first time posting on the forum. My wife and I recently purchased a house that came with a Kitchenaid Hobart KDI-20 Imperial model. The house and unit is all original 1980's and the dishwasher looks absolutely new both on the inside and out. I figure there was almost no use to...