Recent content by swedesapplserv

On the drain line at the top right

I don't know if this model has the siphon break on the drain line, but I have seen leaks show up there at rear of the machine during pump out. The injector was also an issue but looks like that's taken care of

Do you mean the injector on the fill line, or the siphon break on the drain line?

Good afternoon. I was in an apartment building today and found some exciting appliances. The wall cabinet refrigerator was turned into dry storage. I have never touched one before, so this was a first for me.

Hello, Trying to sell the major appliances from the farmhouse to help my grandmother. This is a caloric gas range. I am posting from Wyoming but the range is in Ogden Iowa. My father will be the local contact. Let me know if you are interested.

Hello, trying to sell the major appliances from the farmhouse to help Grandma. This is a Youngstown Kitchens Dishwasher, unknown model number. I am posting from Wyoming but the dishwasher is in Ogden Iowa and my father would be the local contact. Let me know if you are interested

Good Evening, My grandmother is declining and now in "the home" I am helping to find more resources and finances for my grandmother. In the farmhouse is a Philco A-407 range. I wanted to let folks on this forum know that we as a family are interested in selling the major appliances in the...

I do not show any f4 codes. A bunch of F*E4 errors. Do you know what the full code is? I have access to WPL's service matters and can get you a direct answer

I have never seen this trim before. Client had a bad pump seal. I don't carry the KitchenAid pump on the truck and had to order the pump. I don't know what age the washer is. Client had an Armis contract which was ridiculous. They don't approve repairs while onsite. Only after 12-24hours do they...

That is a three phase DC motor. As I understand the concept, the control ramps up the speed to see if there are any issues with pump and water level or rather water supply through the motor. Also as I understand it, the plastic bottom is the price competitive US domestic design as opposed to the...

Good Evening, I consulted with TAG and was told that the washer is now a TIME fill not by pressure. Which is strange to hear. The pressure switch must cut off if levels are hit early? The TAG rep stated very directly that "deep rinse" is a must as there is no water added after rinse and the...

Good Evening, I have had several complaints of shaking and walking on the new series GE top loaders. There was a bulletin on improperly assembled balance rings and all of these machines were okay. I have been "leveling" the cabinet to get the tub centered. GE's TAG has been very much less than...

I have made the mistake of attempting to use the "pickle fork" method of levering off seized pumps and wound up crushing the bearing caps on the motor.

Hello, First time asking a question here. I was set to service a Maytag Coin Washer LA23CS? The machine kept filling till it flooded over. I found a faulty pressure switch that would not close. I was lucky to find a replacement NOS on Ebay. I replaced the pressure switch, found a sock jammed in...

It seems that the rattle doesn't have a rhythm that matches the tub. I can see when the agitator starts to wobble the sound accompanies the motion. On service I would put my hands on the tub supports and springs as it shook and felt for vibration, and if lucky would dampen the rattle at the...