Search results

Ah shoot I forgot about that.. I'm afraid it's too late as it shipped already. I think it was around $27 or so

Holy cow that hatco temp gauge was a pain to get off.. took lots of heat and PB blaster.. I ordered a replaced guage today.. part of pipe fitting came off due to the forces, but I can fix that.

I was going to try the local hardware place I just did not know if they would have it as you noted because of the sholder.. I think they should have it however.. Good call on the heater hose I did not think about that one I will have to check that out. The Ecolab sounds pricy.. Is it some type...

Picked up 25 Ft of AC for the power I decided to hold off on the pipe cutter for the time being due to the fact I can't really do anything yet. I'm not sure if I should order new screws? I see they are like $3 or so each at Hobart..

One question the tailpeice I got has the drain pipe a little bigger so the stock hose won't fit.. My question is the hose to motor will a larger hose be a issue?

It's nice the power company here is subsidizing the price on the bulbs (60W Cree) they are $3.97 each I have about 30 more to pick up.

Opps forgot to include the videos Airdryer Washing :)

Other then the Hobart WM-1 I'm working on we have a KitchenAid Kdi-18 here which looks really good for it's age, in the nice copper tone color, I love the sound of the air dryer and the fill and drain cycles. Uploaded these pictures to the gallery...

I just wished they had it in bigger bags.. I wont know how much dishwashing will be going on until I get the Hobart back in service. As of right now I have over 200 dishes (plates) that need to be washed.

That's odd for that to happen like that.. I picked up about 40 of them from HD in the last two weeks.

Thanks for the heads up!

Nice I was in search for some detergent for the Hobart WM-1 and I see a lot of good things about the bubble bandit.

Yeah at first I picked up the PVC but then thought about the drain temp, I think I should be OK with that PVC nut to the trap, the guy game me one that was 1 1/2" but it was too small to fit the pipe so I ended up getting the PCV one because it was the only one the store had that fits. Any...

Oh.. One more thing I picked up a metal tailpeice for the dishwasher.. the orginal was 6 inches long and the new one is 8 inches so I will get a pipe cutter to cut it to size. Feeling good things are starting to go into motion now.

But what is that black stuff? And how can I prevent that from happening again? I did end up buying that motor and will order the drain pump tomorrow morning.. Now I was at home depot today and I looked at that Lquid tight conduit and the sizes they have are way.. way too thick for where it's...

Yes I will be getting that motor and will be ordering the drain pump. I don't remember if I sent you the pictures but one line strainer was fully blocked and the other had that black stuff.

Well got the motor apart but I lost the fan on the motor, I still have the shims I assume because of all that the motor is no longer good? No fan replacements.. it keeps telling me the number has changed.. on each thing which ends up taking me to a $500 motor and gasket set.

Well because I can't get the drain pump off because of the last screw and my impact screwdriver is not helping on this one.. I may have to drill it out.. meanwhile I took off the cover on the underside of the motor and that bearing is fine and spins freely.

Btw Steve are you sugesting I get new solenoid valves instead?

It's cleaning up pretty well I cleaned the front door.. the mirror finish is amazing for the age! I think the picture speaks for it's self This is the part I got stuck on now