Search results

pump pt1 .

I know this clutch like family I thought it would behave for you, but one never knows... The drive roller contacts the OD of the clutch. It is easy to see the clutch outside diameter spinning while the tub does not, due to the clutch working OK. if the clutch is siezed one can see it NOT...

Thermal will trip off both compressor and fan or so it looks like that to me.

If the resistor is kaput, Then all the current constantly flows thru the bi-metal overload, via the blue wire, to the compressor run winding. That of course constantly trips the overload. For short term test you can bypass the resistor, but there will be no overload stall protection.

What resistor An interesting protection circuit. page HH-16 Current gets to the compressor "run circuit" via either the blue wire (which draws from the overheat bi-metal) OR via the resistor green wire in series with the "auxillary winding" inside the compressor. If running normal, the...

resistor substitution Don't do anything in parallel, that was a mistake. I mistakenly thought a 6 ohm was needed, and I could only find 12 ohms, hence the comment to put 2 12s in parallel - they then would equal 6. This is irrelevant as you don't need 6 ohms. Your manual mentions a 2 and a...

sorry , you needed 2ohm radioshack $1.21 NTE 10W2D0 - 10W 2.0 OHM 5% Model: NTE 10W2D0 Catalog #: 55047896 and a .62 ohm @ 25 watt NTE 25WD62 25W Cermet Power Wirewound Resistor 0.62 Ohm 5% Model: 25WD62 Catalog #: 55050268

resistors radioshack.com NTE pn10wd62 $1.21 .62 ohm 10w Model:10WD62 Catalog #: 55050162 6ohm 20w use 2 of these in parallel NTE Model:10W012 $1.21ea 10W012 12 Ohms Cermet Power Wirewound Resistor Model:10W012 Catalog #: 55050105

2nd pic .

Another view, still a bit fuzzy Note: you may disappoint some people if you repair one of these large old microwaves. Sometimes other members in a household anticipate the failure with joy. They do take much more room than todays units. go figure

my '82 Pennys (Panasonic) needed a new 50v 470uf I just took the board with the VFD (display) off and found the smoked cap. These are all LV parts. After replacing 4 of the caps I put it back together. The VFD is still weak but the cpu board works. I keep the parts at my computer. Here you...

Our Range growing up There was a wonderful round skillet that came with the range. One put it on the heat minder burner, as indicated above, and set the blue, white red colored thermostat for the heat you needed. Much like a sideboard electric skillet except with more btu available. The egg...

g force calc Diam * 14.2 * (rpm/1000)^2 = gforce (inches) twin tub 12 * 14.2 * (1700/1000)^2 = 492Gs solid tub 21 * 14.2 * (800/1000)^2 = 191Gs 1-18 22.5 * 14.2 * (660/1000)^2 = 139Gs

bleach dispensor spring If someone could measure their bleach dispensor spring it would help with picking out a replacement. spring free length wire size (diam) spring coil diam # of turns That will help get the right stiffness of spring installed. Anyone have one they can measure with...

last maint manual brake page 2

next maint manual brake page

next ref manual

next pic 3

next pic2

A few of my posts on this machine from last summer show the brake parts in the clutch assy. I had the brake on this adjusted and working as of july/august. http://www.automaticwasher.org/cgi-bin/TD/TD-VIEWTHREAD.cgi?35506 http://www.automaticwasher.org/cgi-bin/TD/TD-VIEWTHREAD.cgi?35506