Search results

i have a hotpoint 9530W that works perfectly who else has a hotpoint 9530?

I have 2, 95 series machines, One is a 9544w that has a broken 4 way switch that i am sourcing and will buy today. The other is a Hotpoint 9530w that is being repaired also as it has a spider issue and a leg is snapped but it is ok also. Other machines i would love to have is a 9560 or a 9550...

yes there is a hotpoint 9544w on ebay it has 2 hours left to go. it doesn't matter to me as i already have a 9544w and this one is too far away and it's seen better days happy bidding. Matthew...

update the 9530w is now being restored and professionally cleaned the inner drum is absolutely perfect but a leg of the spider has snapped i think as the drum is very misaligned but other than that the machine is beautiful and will work in my house for a while as i am fed up with my candy...

well i finally acted on the bolt i have taken the 9530 apart and taken the entire drum unit out of the machine along with all of the concrete weights and the smooth GEC motor. the bearings are fine as well and the inner drum i think is undamaged i will have to see. the reason that i tried the...

hmm i would guess that virtually any vintage speed queen washer (apart from the water usage) is a very good choice if you can find one as they have incredible reliability especially the 1970's fluid drive commercial washers if you can disable or in fact take off the coin mechanism the sounds...

dating to?????? June 1986 i checked the code and it isn't a pre production model i don't think

sorry paul i was looking at a video wth a bad camera that showed my code it is actually 06 519651

i think i just found out the date code can anyone tell me when the machine was manifactured. the code is 05 519551

yes i am an idiot but i was attempting to have a look at the spider to see if it was incorrectly installed as it was rubbing againgst the outer tub front at 1000rpm while it was empty. a spoke of the pulley also snapped off completely, this happened to Brandon from florenceballarda3060 as well...

i have been to hospital for this i cut my arm open on the rear panel of my 1992 philips whirlpool awm1860 during a bearing change and i needed steri strips as it was too late to be glued or stitched

its been on there since it came from the factory the bearings are ivory smooth though i have tried a lot of WD40 and a few other things to get it to budge like standing on the spanner and asking my dad to hold the hammer handle in the pulley

hotpoint 9530w i have tried this but with a ratchet and a long extension but it still isn't moving i have bought a 30mm spanner and that has done the same thing i think the spanner + the neighbour's lump hammer is an order or even his sledge hammer on the spanner, i hope it doesn't snap or the...

after a lot of trying i still haven't been able to get the pulley nut to unscrew does anyone have any suggestions thanks Matthew

hey mike i think that ransom spares still sell the lid trim kits for the 93, 95, 97 and 99 series machines. also i am switching the guts of a 4 way switch and a 5 way switch modifying them both to create another complete 4 way switch because the original one on my 9544w was broken during a...

it has all the trims as well the hotpoint 95 series machines are almost 70's commercial machines that are down sized they are no nonsense timer driven monstars that in the 90's had the record for the fastest ever spin speed of 1400rpm (even though it was marketed ffor 1300rpm) this machine type...

i have finally done it i have won a 9530 for £60.73 and i think the only damage is a right hand lid trim whick i can get off my 9544w and i could get this machine in the utility to replace a crappy candy 10kg washer

A hotpoint 9544w with all the original parts nothing has been replaced in this machine in 31 years but it has a problem with its bearings so I am sorting it out, does anyone have advice on how to get the bearings out Thanks Matthew

have fun buying https://www.ebay.co.uk/itm/Hotpoint-Aquarius-800-Washing-Machine/123903110457?hash=item1cd9336d39:g:xM0AAOSwuxZdd-uD

this beauty is my machine that i have on ebay right now grab a bargain while you still can https://www.ebay.co.uk/itm/Hotpoint-Aquarius-800-Washing-Machine/123903110457?hash=item1cd9336d39:g:xM0AAOSwuxZdd-uD