Search results

Cut out Hi Mark. Yes, I hope to repeat the experiment today. What invalidated it was, I had the unit unplugged, wanting to check for power at the outlet, to make sure the breaker hadn't tripped. As I was under the sink, I heard a click and suspected it had then reset itself. Sure enough...

Phil No need to be apologetic about being long winded, Phil. Your comments are appreciated. That's what I am fighting for, the ability for members to express themselves and not be badgered by another for doing doing so. Everyone on this site should have an equal voice and should never be...

and more laughs Nobody is indicating your advice is bad, you are very helpful to many on this site. You have a true emotional problem and can't stand for your opinions to be questioned or disagree with. On top of that you have a genuine neurosis about certain brands, mainly your precious...

auto reset Hi John. That was what the test was for to see if the auto-reset would just come on after a cool down, or if it would require a cycling of the power switch, before it would reset. Whirlpool's operating instructions say to turn power switch off or unplug an air switch before...

Obviously, you live in a world of your own reality, John. You forget who you are dealing with on this site. Many of our members have intellect that exceeds yours and greater engineering/mechanical skills. Many have GE tower wash dishwashers themselves. They know pots and pans have no effect on...

waste king Waste King made many fine disposers before being purchased by Anaheim. My Uncle, who lived in Orange County, California worked for them. He got sometime if an award from Waste King for a suggested about a modification to their seal. Don't know specially what it was. My Uncle...

GSD 2800 There is little difference in the capacity of the flatware baskets between the Whirlpool and the GE the Whirlpool is wider but very shallow. I, others on this site, and CU confirm it is inferior in its cleaning ability. You view the world through biasled colored glasses and have no...

no results In great expectation that the ISE disposal might require a power recycle to cause the automatic overload to re-engage the circuit, I allowed it to do a no load run. The auto-reset overload cut off power, eight minutes into the test. Whirlpools instructions indicate the overload...

GSD 2800 reactor's profile picture John's usual exaggerations coupled with his childish terminology, "crappy ". Invariably he has to interject his negative opinions, even when no one has asked. Lol Many of our members have had GSD 2800's, has any one of you ever experienced a main board burn...

gsd 2800 John's usual exaggerations coupled with his childish terminology, "crappy ". Invariably he has to interject his negative opinions, even when no one has asked. Lol Many of our members have had GSD 2800's, has any one of you ever experienced a main board burn out from high current...

reset There is nothing in the literature, that I read that indicated a reset of the electrical power is needed. Although it does say to turn off power before attempting clear a jam, which is what all disosal manufacturers state. What I will do is overload mine and see what happens. I have work...

surprise lack of safety I could barely believe what I read, when researching Whirlpool 's data about their newly redesigned ISE disposers. It is an accident waiting to happen. It didn't prevent me from purchasing one as I understand the potentialities and take precautions. For the average...

reverse Agreed, Dan and Mark. I was disappointed to see the auto reverse gone. That has dejammed me many times in the past. It also increases the life of the grinding ring by using the opposite cutting surface each time it starts. It would be nice if the undercutter were in all models, but...

ISE Agree with what Tom and John that In-Sink-Erator is the way to go. Whirlpool purchased them from Emerson Electric in November, 2022. You are supporting an American Company and getting a product assembled here. In my opinion, a much higher quality product with greater longevity than the...

water direction change You are attempting to use the same wrong argument about water direction to indicate that that a power tower can't wash the upper rack. I'll give you the same answer answer as last time. Water can and does change direction when it hits a surface, it's called...

water direction change You are attempting to use the same wrong argument about water direction to indicate that that a power tower can't wash the upper rack. I'll give you the same answer answer as last time. Water can and does change direction when it hits a surface, it's called...

bullying Prove it, John. "Bully" is an appropriate word that should be applied to you and you treatment of others on this site. You may think you are superior to others on this site, but you are not. Not even close. You have no right to continually denigrating others, neither their posts nor...

you are too funny for words The power tower washes independently of the lower wash arm, John. That's why it is called random loading. Pots in the lower rack have no negative effect on upper rack cleaning. If you don't have enough adult vocabulary to use better words than "silly" you...

spst 5v dc Paul, you didn't state what characteristics you wanted, so I assumed you wanted the most basic of relays, a SPST, normally open solid state relay with 5v dc activation. Basically an on-off switch for one side of a circuit. The switch is normally open (that is "off") so when you...

1200 con't Yes, Whirlpool did use a shaded pole motor. I suggest you look at their literature. There is no excuse for your not knowing that. You went from saying GE tower washes couldn't clean in the corners period to now they can't clean pots and pans and bowls in the corners. Keep making up...