Search results

Pinkie and her parts live in the living room for now. Getting ready for paint. Using 400 grit wet dry. Not much paint left in some areas. Still working on the tub.. Yuck so much black tarnish. And this tub has iron erosion. And the more I clean it I'm fearing I'll create a hole. tomorrow I'm...

Welcome The machine you have described is a round porcelain Tub? Correct. Your pics didn't load. Do you have a pump? Or is it gravity drain? I presume you have checked the hose to see if it has a hole. ( I know it sounds simplistic. but I hope it is what is wrong.) And with a bright light...

I agree with you. I bought a very long brush. Short bristles and stiff. It will do a more than adequate job of cleaning under the gryator. Still on the hunt for a real donor for Pinkie. Or parts. I was reading old posts and I found a comment made by Geodelph ( spelled wrong) that the pu and...

No luck. It's still stuck. I don't think penetrating oil is the answer either. I've detailed cleaned the body. Removing the oil down the leg and around the wringer, The grease and gunk in the castors. Tons of animal hair in the castors. This was most likely used in a horse barn for blankets...

1960's Turquoise General electric matching stove and oven. - $150 (Mesa) az http://images.craigslist.org/00X0X_jeI7q5E9BGk_600x450.jpg http://images.craigslist.org/00h0h_8o2HIG9spSS_50x50c.jpg A little dirty But still cool

Well .....pull while running?? It's an idea. Don't know how to make that work. My brain says hum. kinda dangerous. Drilling a hole and trying penetrating rust remover is less forceful. I have the other one out of Pinkie. I really want to put in a new water seal. So guess we have to do what...

It's a no go and it's wringing great. Thanks for the I was just too gentle getting the wringer head to lock down. clothes are as dry as the automatic spin cycle. Gryator....This thing is stuck. Will not budge. I knew the water level was low. Some folks were in a rush. To see it wash...

Utube link short clip of wash action DOn't know it videos are allowed in message so heres the link http://https//youtu.be/dGfgkfgaAQA

photos of puller. Great effort but still stuck. Running more laundry in hot water. Alot of grainy chunks came out possible sediment. So... really don't want to cut it up to get it out.

I have very wimpy turning ability. I tried turning it clock wise yesterday, I'm so afraid of breaking something I just didn't turn it hard enough. It's locked now. Should be much more efficient..LOL. We are going to fashion a type of puller similar to the one in the manual to try to remove the...

Ill read up on it. Thank you I didn't think of the service manual. And Happy new year to you

Upon researching the wringer I gather this model has no adjustment as to how tight the rollers are. Hum.?

Thats what I thought about the oil. Machine was 50.00 paid 20.00 in gas for the truck. so all in 70.00 on this one. Got it home last nite. After supper rolled it in the bathroom and put water in the tub. OOPsz of course a leak. Small split in tub to pump hose. What do we have to jerry rig a...

HAPPY HAPPY The white one works. got a video of it working so far so good.

Got the pictures backwards. Wow thats a huge picture. Well got the parts and had to add better lip. The water seal will be under the lip centered the washer appears to be able to fit correctly. I have to wait for my assistant( lol) to get home to get a second opinion. I have to order the...

Yep It's worth a try. When the parts get here I can judge the worthiness of the repair.

Not perfect but There is still room for improvement. It may work as is. Thoughts?

Got it. Your desk top worked fine... Thank you Thank you....The manual came thru fine. Has all the info we will need. We got the vertical wringer shaft all cleaned out. a few hard chunks but the gears are good and spin freely. Still cleaning gasket residue off the inside of the tub. Hard as a...

Ordering goodies Just ordered this from Phil's Maytag Maytag Washer A4298 Seal for Agitator Shaft Package Just the start I presume.

Thats fine... thanks. Stan I have those issues too. Built the lip on the shaft housing last nite, now to remove the liner. What fun.