My "go to cycle" is not Normal, it's Perm Press with high speed spin selected. Or you could use Whites cycle and change wash temp to wwarm. I always add an extra rinse since Turbowash does two spray rinses and one deep rinse in the middle.
I will tell you from my experience that once I selected Turbo.Wash for a different cycle and then start it To completion the turbo wash option remained active from that point on
My 2010/2011 Duet began symptoms oof not spinning over medium speed at best October 2021. That's when I decided to get the LG. This was November of 2021. The matching dryer arrived August 2021 after the death of my 1994 Dependable Care dryer.
Ryne, warm temperature fill is targeted at 90F. I can observe the temperature increase as the line purges from cold water until a mixed temperature of 90F is reached and consistently held there. Target temp for hot is 112F. My water tank is set at 120F. Initially after I discovered warm was...
Ryne, I just finished thoroughly observing the fill process for wash with warm water. There is an initial "burst" of water that is like beginning to flush the detergent dispenser and it's about 5 to 15 seconds then stops and then resumes filling after about 5 to 10 seconds. Then the fill is...
Ryne, I was pleasantly surprised when I got my 4200 because I'd seenso many YT videos of LG front loaders with intense pulsing of water for fills. This was not the ase in my experience. I've got a couple of loads of towels to do tomorrow and maybe another load or two later in theweek and I"ll...
Heere I come I'm all completely opposit to most here. Iw won't settle for a front load wasshre iwthout an onboard heater so the WM3400CW is totally out. CW stands for cold water NO HEATER. As far as I'm cocerned, TurboWash 360 makes a big difference. Given I do BobLoads. Quick saturation is...