Search results

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

  1. adam-aussie-vac

    Sunbeam low heat deep fry cooker

    Yes, it actually does unscrew for cleaning, but the element Is bonded to the bottom of the outside metal bowl thing, I tried using it just a little bit earlier, but for some odd reason it seems to be tripping the breaker. This is after I’ve washed it all out and letting it dry for probably over...
  2. adam-aussie-vac

    Sunbeam low heat deep fry cooker

    Here’s how it looks when I did chicken in it It came out nice and crunchy, a lot better than what I did for when I tried it in the oven The only real downside is you have to clean the inside of it a specific way, I hand washed it in hot sudsy water, then afterwards the instructions said to...
  3. adam-aussie-vac

    Melbourne Australia - swap on offer

    The Japanese machine I think it’s probably from the late 70s Well the American machine is probably from 1985, unfortunately with the Japanese machine I’ve had to retrofit a pump onto there as the original one was leaking quite badly, so that’s kind of zip tied through the original bolt holes...
  4. adam-aussie-vac

    oxy clean and the bleaching effect

    Reply 2 All of my dark regularly go beyond 90°F, They normally get washed at 140°F, The only thing that I’ve really had happen what a bunch of bleach and rust looking stains from when I washed my laundry in dads washing machine even though we don’t use bleach, all that was used was regular...
  5. adam-aussie-vac

    Sunbeam low heat deep fry cooker

    Hey guys, just picked this up on gumtree for 40 bucks it looks like it’s brand spanking new, it includes the recipe booklet and almost all the attachments apart from the all-purpose basket shown in the accessories section, I’m not exactly sure how to use the low heat insert (the large milk white...
  6. adam-aussie-vac

    Melbourne Australia - swap on offer

    What does the inside of the GE look like? I technically have doubles, but one is an American GE and one is a Japanese GE, Would love the Bendix, but I don’t have a place to bolt it down Plus I’ve got two other bolt down machines
  7. adam-aussie-vac

    Japanese laundromats

    Sure probably wouldn’t be call THAT hard To import something if someone had the money for it, can you go to worry about parts and the like
  8. adam-aussie-vac

    Washing plastic shower curtains? Yeah no

    Hey guys just scrolling through Facebook at like four in the morning cause can’t sleep and this catastrophe showed up on my Facebook timeline LOL, I’m taking this with at least probably a 20 kg bag of salt So the lady takes off both the cloth and plastic shower curtains, shove the plastic and...
  9. adam-aussie-vac

    Japanese laundromats

    Also here’s something I found out, Anybody recognise these machines?
  10. adam-aussie-vac

    Japanese laundromats

    Do you remember what the laundromat was The had the H axis machine? That sounds extremely interesting and I eventually want to visit Japan Sunday so that’ll be the laundromat I want to go to
  11. adam-aussie-vac

    How Often You Should Wash Your Sheets

    Don’t worry bragging rights are given, and maybe I should actually get around to vacuuming man my mattress again, I remember I used to shampoo it because the water came out quite dirty so I hundred percent thought it was worth it and it’s probably something I need to do again and why not I’ll...
  12. adam-aussie-vac

    Japanese laundromats

    Hey guys, I was born after watching couple YouTube videos on Japanese housing and one of them included a laundromat I wanted to do a bit of research on them, has anybody here visited Japan and had a look at how different machines Are in comparison to the western world? Here’s some photos of a...
  13. adam-aussie-vac

    How Often You Should Wash Your Sheets

    I just do my sheets and bedding at 95c Because I know that does a quality job in comparison to a quick short cold wash
  14. adam-aussie-vac

    Is this rust?

    I’ll give that a try, but for what I know I don’t think my Rain water tanks have much Iron deposits, and I did test it with a magnet, and it is kind of cheap stainless as a magnet sticks to it, but considering that it’s been around since probably the early 70s and that’s really it, I think...
  15. adam-aussie-vac

    Is this rust?

    Hey guys, after taking the tub off to clean the inside of my Bosch a 500 I think this might be rust but I’m honestly not sure considering that the entire machine Internals that come into contact with water I made of stainless steel
  16. adam-aussie-vac

    Lucky escape for us all!

    Hosed it down? Like literally sprayed it with a hose on the front?
  17. adam-aussie-vac

    Can I iron something that is 100% cotton that reads “do not iron”

    I want to try and get some more experience using my rotary Iron That’s the reason as to why I want to Iron them, Cheers what the tag looks like Oh yeah there’s also a photo of big fat wad of Lint that came out of the dryer
  18. adam-aussie-vac

    Can I iron something that is 100% cotton that reads “do not iron”

    Hey guys, I recently had brought some towels from Costco, they are 100% cotton and are white, but the label on them says do not iron, Should I trust my knowledge knowing that cotton is ironable or should I Trust the tag? Because considering my pillowcases are 100% cotton and they iron completely...
  19. adam-aussie-vac

    Trying to get the wash bowl off my thor

    Oh sorry, I didn’t actually meant the Bowl where the clothes are washed and spun, I meant the outer tub as I’ve undone the three screws that hold the control column on as well as the two bolts at the bottom of the tub, I’ll give it a try tomorrow But it seems really stuck in place, I’m...
  20. adam-aussie-vac

    Trying to get the wash bowl off my thor

    Hey guys, so I got the screws and nuts undone, but it appears that the bowl is really really stuck on, I’m probably gonna spray a bit of penetrating oil or fluid around the gap tomorrow morning, just to try and help loosen them that way I can get a better look underneath
Back
Top