Search results

early GE dishwasher Originally released in 1949-50, This unit was a completely manual dishwasher, and you had to monitor its use. The owner had to turn the water on and off, switch from wash to drain and pop the lid for air drying. As GE's first attempt in producing a portable dishwasher, they...

"all the registers low on the floor" I believe that in the Northeast, this is common practice. Probably since warm air during heating season is provided through the same vents.

New, unused. make an offer! On FB Marketplace located in Hudson, NY. Mid-Hudson Valley area. https://www.facebook.com/marketplace/item/1185674476017978/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks

The weight of the range is supported by the countertop. There should be 4 thumb screws from underneath the cooktop that screw up into the countertop to secure it. The 48” cable should be long enough to allow removal without disconnecting the wire. I’d find something to set it on. Like a wooden box?

The weight of the range is supported by the countertop. There should be 4 thumb screws from underneath the cooktop that screw up into the countertop to secure it. The cable should be long enough tii ok allow removal without disconnecting the wire. I’d find something to set it on. Like a wooden box?

Except The KD-17 series were the portable models that changed from the cabinet panels to a wrap-around cabinet that remains in place when converted. You can tell by looking at the rear corners and see the wraparound construction.

Install directions Here you go. Note there are different dims for self-clean vs non self-clean.

Frigidaire fame GM Frigidaire ranges were notorious for crappy crimped terminals, so maybe you have a burnt-off wire somewhere inside the back. Other than removing the bake unit from the oven to visually check (WITH THE POWER OFF!!!!!), it would require removing the range from the cabinet. If...

not D&M that's a WCI clone of the Westinghouse, Frigidaire, Gibson, et al style. It looks like the Montgomery Ward version.

WIB WIB washer model was introduced in early 1979. Middle of the line model.

By the sink? It’s either a built-in toaster or built-in foil/plastic wrap/wax paper dispenser

it had feet on the bottom on the sides of the access panel that would pop out when you opened the door to keep it from tipping over when a loaded rack of dishes was rolled out. no other dishwasher did that, especially kitchenaids! this was a serious infraction and i hated that! IIRC...

pre-GE design This Hotpoint features the old Hotpoint-design wash arm and reversible motor. I think they called it "jet fountain" washing. It's the same as shown in peteski50's pictures. My parents had a more deluxe model in their house that was built in 1973.

Owners manual The owners manual for this dishwasher is found in the library, accessed by the tab at the top right of the page. Sort for KitchenAid and look for the KDR-17 portable.

I have a little info.... Hi Sean - although I don't have a lot of GE information, I was able to find out a few facts for you. The model number for your oven is J247-1N2. This version does not turn the broil unit during Time Bake. The p/n for the timer is WB19X18. I have posted a page from a 56...

From a 1961 GE catalog "New!" Plus a copy of an individual brochure. Locally, these Mark 27's were used in many 1960's housing developments as we are near the GE Main Plant in Schenectady NY and GE appliances were the predominate choice of builders.

Last of the 1/18's I believe this is a WC-6G Crown model from 1979. The color is not shaded, the lint filter appears to be the basket-type, not a bed-of-nails, and the water level switch has the level indicator label showing the JetCone agitator. I couldn't find this label on any earlier...

Imperial Since all KD15 portables were just the built in models with the panels & hoses, I'd just move all the parts to your Superba. Unless the Imperial has a better tub and/or inner door panel.

Let me check I may have one, I’ll check later on today

Could anyone please give me a clue? "Could anyone please give me a clue as to how the KA disposer is separated from the sink flange?" Will this help? I remember that it's a little tricky.