Search results

Spanish Electrolux Machines with that drum were all made at the Alcalá de Henares factory in Madrid, Spain. I believe it has closed quite recently. Many UK market Tricity Bendix machines and the Zanussi "Delta" model FL882 were also made in Spain with this drum. Tom.

The meter should be set to K ohms (thousands of ohms) as the water valve coils have high resistances and would appear open circuit if the wrong range was selected. If you then have no reading the valve coil is open circuit and this means it has failed. Tom.

This model is cold fill only. Tom.

Hello Ritchie, I have the exact same model. They are indeed excellent machines and were made just before Zanussi/Electrolux started to cut costs. The first thing that springs to mind is the electric water valve which may be faulty. This is still available from shop.zanussi.co.uk as part...

As far as I know through looking at the spare parts situation, these are Antonio Merloni machines. They have parts in common with early Servis Gem and A. Merloni built Bendix machines. The timer sequence on the Frigidaire is very similar to certain Washcraft series Zanussi machines. There's...

So Philco is now owned by Indesit eh? Out of interest I was looking into availability of spares for the old Philco built Bendix machines (such as the 7147) and the situation is at first really quite confusing. Exploded diagrams are on the Electrolux website and parts are/were available from...

A personally think an A3110 would look great in any kitchen. Tom.

I can confirm that they are made in Italy in the proper Zanussi factory at Porcia. Tom.

Yes, it's definitely Antonio Merloni, I agree. Tom

Regarding the Servis condenser dryer. The seller states that it is 18 months old - I don't think so. It is amazing how many people bend the truth in ebay listings. Tom.

You may also be interested in this video of the Zanussi Jetsystem's German cousin the "Privileg Multispar". This is the same age as my Jetsystem and has similar programming. Tom.

Final spin. It actually sounds like the bearings are going here, but it was the belt which was at fault. Once this was changed the spin became much quieter. Hope you enjoy the videos. Tom.

Final rinse.

First rinse.

Cooldown.

End of main wash.

Ok here is another. The machine doesn't jump about as much since I made these videos. I've got it properly level now and it also runs much more quietly since I changed the belt. One day I will make some new videos. Tom.

Hi, I still have the videos but they are unlisted. There is one in the link below. Let me know if you want the others. Tom.

My Jetsystem (ZFL1023 manufactured Novemember 1989) spins during the cottons main wash every 2 minutes. I believe there could be a few possible reasons as to why this was stopped: 1. Spinning every couple of minutes with water and a full load of washing puts increased strain on the motor. 2...

"from 1990/91 they changed to the Nexus tub arrangement, with corboran construction and quieter insulated brush motors" The enameled tub machines with brush motors were actually quieter than post 1991 because they had foam insulation around them. As far as I know the Nexus tub machines didn't...