Search results

Great Job Thanks for sharing with us.

Mine Was plastic But still in good shape as well as the metal parts. It was just that thin metal hub that had broken.

Good job again Heres a pic of what actually failed on my neutral drain. It was hard to see till after cleaning. Nothing else was wrong except this thin metal hub Just a heads up for your next one. HTH

Bill Sorry I missed seeing this til now. I’m almost a month late. Eddie is correct. I do have and use a monitor top as a daily driver. It’s a prized possession. However is also a bit nerve racking..not because it fails to function.. but because I do not have the tools or mechanical skills...

Good job Sean! Looks great I got lost here on the problem with spin speed.. how did you resolve ?

Eleni Here’s you go First letter is the year made Second letter the month made.

Pete Yes during my time in Pro Laundry and Dry Cleaning Aqua Ammonia was used for the reasons Laundress has mentioned above. Sodium Perborate was used mainly at the spotting board so spot could be slowly heated with steam then flushed away and air gun used to dry..provided fabric could take...

Well Pete There’s been lots of decisions here over the years as to how effective Oxy Clean is for bleaching..especially since it does not contain a AOB. But between the sodium percarbonate and sodium carbonate contained therein..and along with hot water? Guess the black dye didn’t stand a...

Eleni Your looks to be made in April of 1958

What if They ain’t white?

What qualifies theses expert? Who are they? Is there a test they take? What’s with washing sheets in vinegar (notice they didn’t say rinse them) Why in the hell would you reduce the P.H of wash water with vinegar? “How to really get them clean” How come they won’t say wash em in hot...

I know you said that you hadn’t cleaned the inner tub yet, so I’ll wondering if your checking spin speed with inner tub in or out? John says to re lube, so I’d do what he says and I’d try putting the tub back in temporarily, if you haven’t already, to recheck spin speed and listen for noise...

The last time I fixed a leak, it that turned out to be the the black rubber seal (donut) that seals the plastic tub to the center post. (Inexpensive part) That required taking the plastic tub out of machine. So that leak problem was solved. But I do remember having trouble getting the inner...

Good job With some adjusting you should be able to get the pump wheel to engage. While machine is off..Look under it and operate the pump lever on and off, you’l be able to see what going on there and possibly what may need a little lubricant. The rod should be threaded to adjust length to...

Lubrication From owners manual

Well It cleaned up good! If u post serial # someone here will date it for you. I’d guess 70’s I’ll look at my service manual to see about lubricant for wringer. You already know how to set the wringers apart when not in use.. Sounds like it’s ready for a maiden Voyage. Spot with cleaning...

I wouldn’t use oven cleaner As suggested, a plastic spatula or a plastic putty knife to scrape off sides of outer tub. Can be used on bottom of tub as well. Then pick up what falls or vacuum out. On the outside of the inner tub..I’d use a SOS pad and the garden hose. And maybe some...

I guess you could try putting the nut back on loosely, fill with hot water put two heavy towels in it.. or something heavier than 5 lbs and babysit it while it goes a through a wash/spin cycle, just before it goes into spin, stop it and deliberately move the two towels to one side so it will...

Live n learn Can u post pics? The more eyes u get on it, the more ideas you’l get on how to fix it.

This may be another issue? It’s easy enough to check the exit point of a dryer vent to see/feel air coming out..no tools required. But here’s a spot that might cause trouble. Most people don’t disassemble and clean this duct. And if clogged..Id guess would interfere with performance. Then...