Search results

Reply #29 i watched it all the way through, the tub's balancing springs genuinely seem to be very innovative, along with many other features such as the machine technically not having a true outer tub, all in all it's a very interesting machine i suppose another thing you could do is film a...

lets see what it can do with the whole 9000 hehe if you have a circuit that can support it ofc, being 40 amps after all ;)

My 1999 and 2000 Miele Professional WS5073's

Replying to Revvinkevin I must admit, the Miele PW6065 was quite literally the most variable and powerful machine I had at one time Mine was an OS model (440V 60hz) that I converted to UK single Phase (240V 50hz), it had 2 heaters that pulled 4600 watts I had a few little issues with it but...

I have found this to be true My Whirlpool Direct Drive has traditional Euro spec 3/4 inch hoses, and my GOD they took a lot of effort to put on Luckily for this gorgeous specimen of a MAT12, it doesn’t appear to be the same case, as a Miele hose did thread on quite easily I think I’ll try...

a small update after breaking one of the machine's non original hoses, i do want to replace them with either some stainless steel braided or Miele Professional hoses, as both would be considered "high flow", though i am also considering actual Continental brand hoses i saw on the back of a...

after considering importing one from Cyprus because of how seemingly impossible they were to find in the UK, i stumbled across one on Ebay at a seemingly shocking £425 not many would consider a Maytag at those prices for such a seemingly "old" machine, but i suppose that's the average user, not...

so, not many of you know that i have a Miele PW6065   it's the most basic model of it's range, made in 2016, around 3-4 years before their production run ended as a whole   mine came to me as a beater, it was hauled out of a military ship and then sold on to a couple who couldn't use it, as...

at long last, an update to this in a rather incredible twist (and some calculations) i found out the New Wave motors are capped off at 21,000rpm with a maximum possible speed of 32,000rpm (at this speed they self destruct but technically it's a one shot run)   the calculations are mainly...

Update The issue was found to be me being a moron. I had no idea where the connector was for the temperature sensor on the main board of this thing, so I ended up taking the front panel off and disconnected the connector from the NTC itself. It gave me access to programming mode and I now have...

Thank you launderess Although the machine is typically locked by a code, in this instance the supervisor level doesn’t even exist at all in the settings Its an incredibly strange issue that I have personally never seen before on any PW I hope to get it resolved without an engineer call out as...

hi all after wanting one for 13 years (since i was 6 years old) i finally managed to get my hands on a Miele Professional PW6065 the odd thing was that this machine is an OS model. i live in the UK so it running on a 50hz supply isn't an issue as Miele's are able to run on either 50 or...

Hopefully the tub can survive over 190°F

drawing a fair bit of inspiration from Robert's Super Unimatic, and my dad's own ambition of making his raspberry Pi do more than just switch some LED's on and off or make something beep, it's time for us both to create something a little odd and interesting now while none of this genuinely...

i went to the Harrods Department Store in London UK about a month ago and managed to find the only thing i went there to see, Miele's product display the washers and dryers are fully hooked up to water, electricity, and drainage and i got hooked when i last visited in 2015 being either a smart...

on that subject some people don't like my hobby, as it seems odd the the average joe who isn't a collector, or into washers at all, the amount of idiots who think i do things like that to my washers, i tell em straight, most of them were serious about it too, not having a joke, but once i tell...

i suppose i'm having too much fun in the garage lol pic 1 is rearranging the garage, because i wanted the Miele as far in as possible, because, as everyone knows or has been told by others, they weigh an absolute TON pic 2 is the garage after being rearranged, in year order (or at least i...

possibly a Miele W754S Special electronic here is a link to mine sudslocking it has a spin brake for those situations

gary was a good man, an honest man may he rest in piece knowing his dream was fulfilled i remember him as a restorer, a collector, and overall, a very nice chap

my dream washer and dryer set mine would be a Hotpoint 9560W with the matching 9340W dryer the washer has a GEC motor that was modified to spin the drum all the way to 1400rpm (was advertised as 1300rpm, but it was actually 1400) brochure photo from thread 61998 photo by Chestermikeuk