Search results

maytag dw inside

maytag dw outside

KDS 21 Outside

KSD 18 Inside

Cleaning out the garage. Here is what I am giving away - free - KDS 18 - parting out - I'm keeping the motor/pump/washarm/drain valve. Racks are in good shape - never tested the unit after I picked it up off a curb. free - Maytag U484 - works, but not sure if relay is bad or if motor runs...

thanks, and I am going to have to get a new empeller Thanks for the information Steve. Those rotation speeds sound about right for my wm5h. I would think the newer dishwashers would do a better job of washing if the arms didn't turn as fast as they do. Just about two days ago was washing...

Speed of lxi washarms Steve, do you know what the rpm of the wash arms should be on a lxi machine. The new one at my school last year seemed to turn very fast and didn't wash well, my 20 plus year old wm5h does much better. I would estimate by the rhythm that the lower arm was turning close...

Just put a new u joint kit in the calypso. There was a bonking noise that was getting worse. The old u-joint had some play in the inner part and I think there wsa also a problem with the leveler. The old one had a yellow gasket with a plastic bottom and the seal seemed to snap around the...

awesome!!! I remember watching one as a kid at the church. Please make some videos for us! That is awesome and if you should find another one let me know, I would love to have one myself. Such a unique design and so fun to watch. John

Thanks Appnut I ran a Pots and Pans cycle today and you're right, it did do two full rinses. Guess this will be my "normal cycle" from now on. Next thing on my list is to get some STPP. Looks like the other wash arm in going to take longer to get than I thought, but can't wait to see if there...

Kitchenaid wash arm The wash arm I ordered is for a new Kitchenaid so there is actually one less hole than the whirlpool and the holes on the wash arm are smaller that what we are used to in a Hobart Kitchenaid; plus they use the same pumps so I think the pressure will be good if not a little...

Have a somewhat new Kenmore Elite tall tub dishwasher with turbozone mod - 665.13752k602. Was wondering if there is something you can do to trick the sensor to get a full rinse instead of a purge after the wash so I can get 2 full rinses. Even with a dirty load and using the Smartwash - still...

temps central air 3 1/2 ton on a programable thermostat - 70 on the weekends, goes up to 80 or 85 during the day when not at home and back to 70, been putting it down to 68 or 69 when i'm there. The a/c was keeping the house at 71 yesterday, it was about 97 outside, turned on the little a/c in...

high temp detergent The detergent I use that doesn't turn aluminum is called "high temp detergent" from Kommercial Kitchens 800 -962-1555. The only numbers on the bottle is the patent 5,577,527 and SEA13826. I don't see it on their website any more but maybe they still carry it. Says it is low...

have had the same issues I think there are more factors than that which contribute to the oxidation. Here is the deal - I have a Hobart WM5H commercial undercounter dishwasher. (150 degree wash -180 degree rinse) If I use Cascade or other dw detergent on my aluminum sheet pans ($5 buck ones...

could it be???? Could the problem be that at start up there isn't any water pumping through the condenser causing too high of a head pressure kicking the compressor off, then when the pump gets primed and water is flowing through the condensor like it should it is ok. Then if it is off a while...

Well the Atlantis has decided it no longer likes hot water. It starts to leak while is it filling, must be the tub seal, the wierd thing is it pretty much will stop leaking after it starts running awhile, but it is not a small leak. The water comes from around the metal support where the plastic...

another one love the calypso!

howdy Howdy y'all

Congrats! Congrats Robert, that is way too cool!!! The whole story there is pretty wild as well. Good luck with the restore and thanks for this site and all you do. John