Search results

For this GE model. a) The set-temperature of the Control Inlet Thermostat could be lower when its 9 Kohm is connected to the 120V. b) The set-temperature of the Drum Outlet Thermostat could be also lower when its 9 Kohm is connected to the 120V. A) When the Temperature Selector is NORMAL, both...

Exhaust hood for GE dryer. I checked the exhaust system of my GE dryer. It seems the weaker part is the original exhaust hood which was similar to the 2.5" as shown on the right-hand side of the table. Now I have changed it to the 4" version as shown in the left-hand side. The difference of...

For GE electric dryer, there are a)one Safety Thermostat at the inlet which will cut off "both" heating elements when overheat b)one Control Inlet Thermostat at the inlet which will switch ON/OFF "only one" heating element to maintain the inlet set-temperature and c)one Drum Outlet Thermostat at...

combo52 Thanks for the advice. Will check the venting against the requirement.

It should be a digital thermometer.

The digital thermostat.

The sensor in the lint tray.

I bought a digital thermometer to measure the outlet temperature of the GE dryer. The sensor was placed in the lint tray. The setting was in normal cotton cycle with a typical cotton/mixed load. A) From 0 to 10 min, the temp was increasing slowly from 68F to 113F (47F increase) B) From 10 to...

There are two heating elements in this GE dryer. It seems that the dryer will cycle only one heating element ON/OFF to maintain a desirable drying temperature while the other heating element is always ON during the drying cycle. In such manner, the drying temperature variation will be less than...

I prefer washers and dryers with rear controls.

After using the new dryer for several days, my wife is quite happy with the new dryer because the clothing dried from the new dryer are softer than from the old dryer.

Thanks combo52 for the valuable info. It seems there are two heating elements in the GE 7 cu ft dryer. Wonder if you know the wattage of them and why it uses two instead of one?

Please note my GE is of the new style (not of old style from Frigidaire). See diagram attached.

Dear yogitunes Could you tell me the model no of your 1 year old GE dryer? Dear combo52 Could you remember the model no of the 9 year old dryer?

New GE GTMP400EMWS dryer. I bought a new GE 7 cu ft electric dryer to replace an 16 year old Kenmore dryer (with top lint filter) because the old dryer occasionally causes brownish marks on the collar tips of shirts. Apparently the tips of the shirts were caught in the gap between the rotating...

It will be more gentle to clothing during washing.

Its modified agitator.

Its control panel.

Maytag Dependable Care TL It is in Canada since 1996.

Its motors.