Search results

Ooh So perhaps a little later than I had originally thought! Here's some more recent shots for you (today) as the above picture was about 3 years ago.

thanks Thanks Paulc much appreciated, I had figured it would be quite a low-end machine but it is ace nonetheless. :)

Hi all! Thought now would be a good time to pop up and share my machine. It is an Indesit W610G I picked this up early on in 2014 from a kind lady in Liverpool who was very sad to see it go, for the privilege I paid five pounds and was told she was only selling as it had 'got noisy'. After a few...

Oh dear Naaah. Its not bearings. Half the spider has come off and punched a hole in the tub. Anyone need any WD23 parts? Hahaha.

Hi all again, Got a poorly WD23, bearings are gone, saving pennies here, does anyone have the seal and bearing spec available to hand? I believe the bearings are 6204Z and 6205Z and the seal I have no idea on. Let me know if you guys know anything!:)

Had a play I got it plugged in outside, it tried to fill but the water was coming in slower than it was leaving, the drain hose is badly perished and the main tub seals are gone. I filled it with a hose and skipped through the cycle, all I could get out of it was it running the pump to...

Sheet metal Apparently so! I'm no expert though. Haven't seen a hotpoint top loader for sale in a while though, in any kind of order (other than the one I just got!) What's yours?:)

:) When the weather is a bit better i will drag it outside and see if i can get it to fill and run:) thankyou all for the information and I will try to keep this updated!

Ace Is JBWeld you refer to the epoxy resin stuff, or a forum member haha! Uploaded a few pics of the tub, what is the basket filled with fluff atop the agitator supposed to do? Suspect progress will be slow. :)

Thanks! Thankyou Richard! Had a closer look today, doesn't seem all that bad. Can anybody give me a precise date on this model? The date codes really confuse me.

Feeling particularly foolhardy today. Drove an insane distance to pick up this machine (see picture), some of the UK chaps on here probably saw this on ebay and turned it down. There is a lot of work there! Will have to get quite 'creative' with the exterior, but the inside doesn't look at all...

Apologies if this is hugely off topic, found this hotpoint fridge at the side of the road (see pictures). No pump or anything on it, but all the trim and little doors are present and mostly in good order. Shout up if you want any bits, i can post out for a few quid or come and take the whole...

I found one of these at the roadside yesterday morning haha. Pretty clogged up and fan belt snapped... just stripped it apart for a good clean up. :)

Beautiful! Star ordered and received. Machine stopped running completely the following day... Easiest job in the world, removed some covers and removed springs to lower tub, back off and drum comes out. Nothing wrong with bearings. Two legs of the 'star' broken off. Lucky it comes as a whole...

While awaiting spares for the old AEG that you chaps have helped me with so well... I landed this. An Indesit 610 G circa 1985 as I was led to believe by its previous owner who bought it new? Anyway, it's working fine and dandy but the bearing is starting to make a racket. Tried to find...

Hi Tom... It has to be said you're an absolute star! Only other question is... when were these actually made? :)

Sorry for the delay in replies, have been away from keyboard (Managed to get a 30ish year old indesit for a fiver to sort my daily woes!) What I could find from a rather indestinct label (it's been wet... very wet recently) S/N 645067542 605 102 902 F. No. 67912017 And yes, it is a washer...

I'm struggling with that too, but at least you have a diagram! It appears that the diagram does not depict that pipe at all - it should connect between the sump pump inlet and the black hose shown to the left and up a little, along with the white plastic connector shown to the left and down...

Hello! Don't know if there's any other people from the UK here but I'm looking for ANY automatic washer pre-1990 dead or alive.... to go to a good home. I'll travel almost anywhere in mainland UK to collect. Cash waiting, as long as it's not an unreasonable demand!;) I'm also after driers...

Hi all. Firstly, I'm a newbie here. I have all sorts of old and curious appliances lying around, but the one that's giving me trouble is the old AEG Lavamat 2000 from the mid 70's (I believe) Which I rescued from the tip just over a year ago. I pulled it out of storage a week or two ago and it...