Search results

Agree with John L This is a point voyager platform and there are loads of pumps on eBay and they are reasonably priced even when new. The main pump motors do start getting noisy as they age. Sometimes the shaft seals will leak slightly and then get water into the bearings. That happened to My...

Shimming issue? I was wondering, when you swapped out the pump from the Imperial unit, did you take the pump apart and then reassemble all the workings in the Superba? The wash and drain impellers had to be shimmed correctly in order to 1. provide proper water pressure to the washarm and to...

Pop it out of the tub! Those pumps will come out thru the inside of the tub once you unclip the motor. If the machine is not installed under a counter, take a 2x4 and put it under the motor and lower the machine back down on to the 2x4 and the motor should pop right up into the tub. Remove the...

Not a Point Voyager! Cole mentioned that the lower panel was missing. Point Voyagers were the Tall tub machines and had the single door panel that went almost to the floor. Most likely a Power Clean/Ultra Wash based machine.

drain issues and missing part Your machine does not have a drain valve per se. It has a reversing motor that allows the water to drain out of the machine. It also has a white 4 inch backflow check valve screwed into the bottom of the pump housing under the machine that will allow water to drain...

A true classic! Our first dishwasher was this same KDS-15 but slightly newer than yours. Yours is probably one of the earliest machines with the screwed together washarm. Regarding the copper pipe inside the sink base, I would have to agree with SteveD and say it is the drain line and was...

Venting kits I never tried installing a vent kit in a FL machine, but it sure seems like a good idea. I remember seeing them years ago as a retrofit for at least the Whirlpool Duet machines. You may want to search for such a kit before going crazy trying to cobble something together to fit your...

Good Call, Alan I have seen the reset lever out of adjustment from time to time. Sometimes people would press the buttons before latching the machine and it makes the lever get out of adjustment. It is easy to check by removing the screws that hold the control panel on the door. 4 on top and...

Thanks, Scott. I don't think they are more than a year old or maybe slightly more so I will definitely give them a call and let them know they need cleaning. The property was more up on the machines we had prior to the SQ's so when something happened to them, they would call for service. Those...

Is there any way to run a machine clean cycle without having to pay to do so on SQ Front loaders like the one in the pictures? Model number is SFNNYASP115TW01. There are 9 of these front loaders in an independent residential setting for persons with disabilities. Needless to say, the users are...

Self cleaning oven may do the trick If you have a self cleaning oven, you may want to give that a try. Use the shortest cleaning time and see if the crud gets burned off. I have an aunt who did that to all her carbon encrusted frying pans and they all came out like nearly new. Just be prepared...

Go back to the store. You did not mention where you purchased the machine but I am sure they can give you a better idea of what a side panel should cost. It should be in their price books if it is available.

a defective pump? Not unheard of to get a lemon out of the box! What is the part number? is it a 120v AC pump?

Just about a reality already! The latest generation of Hobart Commercial Undercounter, door type, conveyor and flight type machines use very sophisticated software to run multiple models in each product line using a single programmable controllers for each product line. Some controllers even...

Drain hose Have you pulled off the drain hose from the pump to the back of the machine? Something could have gone past the original pump's impeller and broken it and then lodged in the hose somewhere. This might cause an error code to be thrown telling the computer the water is not draining...

Yessir, Darryl Much closer. Actually. I believe you hit the nail on the head. I think I will substitute the water level switch from that on into my new machine and see what happens before making any adjustments on the new machine's switch. Hopefully the connections will be the same.

Had to be before 2012 The machine I had, I bought used back in late 2007 and it died by Dec. 2009. And it had Turbowash on it. Like I said above, it was the best cleaning machine we ever owned. It was replaced by a Whirlpool Duet that could not compare to it in any way. The current house has an...

Thank you... Darryl. That's a start. My machine was a few years older than yours. I still have the water pressure switch from it and it looks like the one in my current machine. As you can imagine, I would like to try the old one out and adjust the water level on that one before trying to...

I used to have one of the LG Top Control Washers, but the model number escapes me now and I need to locate a parts manual for it. It would probably be close to 20 years old by now. Can anyone suggest a model number? It was pretty much TOL with turbowaash and onboard heater. It was the best...

Power Up! Power is connected on the right hand side of the bottom cross member just below the tank. Look for the single black and white wires that are usually tied in a small knot. Those are your power wires. Make sure that you connect the black wire to the hot wire and the white wire to the...