Search results

thanks runematic.

Thanks for the update gansky1. Im having so much trouble finding a basket. I need one with the 3 holes for the 3 bolts. Model number for my washer is 11020992991. I was told the part number for the inner tub is W10389328 but all internet searches I have done come up with a 'newer' tub that the...

thanks Gary. good ideas. Funny you should mention that. I scrap metal truck came by yesterday to pick up my old BBQ. He had an old Inqlis washer in the back but I couldn't tell if the tub was the same or not. He gave me his card and told me he could be on the look out for one and let me know.

Oh I found the thread of the guy (gansky1) who used the plastic ice cream container pieces to patch holes in his tub with silicon. It looked great! Here is the link. The pics are half way down the thread. I like this guys work: Thread No. 12518 "Speed Queen Center Posts 101"...

I don't have a pic of the top lip of the outer tub yet. When i felt it I think it was probably rusty inderneath. But holding. I will be working on this repair. I have included a close up image (with some artistic photoshoping to make it stand out) of the main rusted out hole on the ballast...

Hi Tim: I guess you don't know that I like challenges :) The reason I have not bought a new tub in the fist place is that the stairs to the basement were renovated and nothing gets in or out this size. Unless I do some major wall demolition. So I have tried to make this machine work again...

Hi all Sounds like there is no fixing this old inner tub. I have touched the rubber boot and it seems flexible. Looks good from the bottom fo the machine. Its the upper larger O ring that rusted right off. I know where to get one nearby new. So the rubber boot might be saved. Im in Toronto...

Hi I finally got the inner tub out and discovered a rusted hole where the ballast ring is. Ballast has been spilling out and a lot has been lost. The washing machine was shaking during spin cycles. Can I save this tub or not? Should I buy a new inner tub? I am planning to replace the rubber...

thank you , I found the tool at home and got the job done!

in case someone is wondering, here is how I removed this type of boot hub. first clean the hole out with hot water/brushes etc. If you have never seen this before it might be difficult to know where the tab is that you need to press with a flat head screw driver. Insert the flat head screwdriver...

Hi I finally got to this stage of refurbishing my mothers washing machine. Just wondered what type of socket would remove these tub bolts? 15 point? 9 point? And I assume it's lefty loosey, righty tighty? Thanks for the help!

I was just reading that these machines sometimes did not have a balance ring in them. Instead "These washers are quite different from others in that the tub is attached to the cabinet, rather than the transmission. If there is an imbalance, only the basket and drive train wobbles; not the whole...

Oh Oh , I think you are probably right! If so, what am I going to do? Can I save this thing or replace the balance ring?

After removing the agitator of my ~20 year old Beaumark, I noticd a plastic cap at the bottom of steel drive tube. I noticed it had a little hole. I started cleaning out the hole from some soft debris and gunk. I put my screwdriver in there and tried to yank up on the cap but it wouldn't budge...

I actually asked my mom if she remebers anyone dumping anyting into the tub on purpose and she doesn't think so.

Can't be from what was being washed because initially I was just running water through the machine without any clothes. The machine has not been touched for about 10 years. I replaced the water pump. At the same time I looked and noticed the tub boot was a bit leaky on the outside. This...

photo included Here is a photo of the tiny grains still coming out with the flushed water. The water is pretty clean coming out except for this stuff. I just removed the agitator and found a white plastic cap at the bottom of the metal bar. have to get that off somehow. The inside of the...

Hi all. New here. Fascinating site. I just started up my mom's late 80's or 1991 Beaumark Heavy Duty Washing machine. I replaced the pump. It was one of those old style GE pumps. The machine was not used at all for about 10 years. I ran a program with some water and tons of this grey colored...