Search results

Old, gunky transmission fluid; should be honey-colored.

New O-ring installed, cleaned-up and ready to be put together!

All assembled; ready for new fluid and a gasket.

Transmission back in and outer tub is pristine.

This album contains media files from geoffdelp's collection.

Oh, oh ... oil leak!

Looks pretty good here; must be underneath.

Oh yes ... here we go; a bad O ring ... what a mess!

Transmission out and still factory fresh.

Or ... search on eBay or Craigslist for your area for a donor machine that has an operating wringer. The model N2L's had interchangeable wringer heads. The model J and E wringer heads will work on the N, but they are wider and don't fit over the tub properly. To disassemble and reassemble a...

Angelina ... First off, let's make sure the wringer post/drive from the transmission is working. Take the whole wringer head off the machine by lifting straight up and set it down somewhere safe. Plug machine in and you should see the drive rod in the wringer post turning; if it's not turning...

That's right, Ben. From what I've read, you put the machine on the time you want to wash for and turn on machine. What I could never figure out was how would it know you want a full or partial load since it was time filled? Also, what if you needed more water in the tub after suds returned...

Oh boy, Mary ... that's a sharp looking machine!! You bet ... a wonderful piece of Americana. :-) A little bit of elbow grease and toothpaste and voila ... you've got a fun piece of laundry equipment! If toothpaste is too expensive to use, go to the auto parts store and get some rubbing...

Fun thread to read people's stories. Since Mary's Maytag is from 1951, I'm not sure if it has the heavy, cast aluminum tub or a spun aluminum tub; will have to research when Maytag switched over to the spun aluminum. Certainly a big difference in overall weight to the machine! The cast...

Well ... someone is gonna love that honey of a machine; Maytag sure knew what they were doing!! Thanks for the great compliment, Steven and thanks for the fun post, Jim!!

BTW ... love the story about how you found this machine!! Can't believe it was kept in a box all these years and the way it was labeled. That just adds to it!! :-)

Jim ... VERY nice NX!! 1965 was the last year that Maytag used black agitators with red accents on their wringers. They switched to the turquoise accents in January 1966. Steven is right ... if you want to use this machine to actually wash, you should swap out that agitator for either a...

Nope ... doesn't look new to me. I get February 1979 as the date. It has the dreaded safety pedal. Looks like the pedal hose and bulb were replaced. The originals were a gray hose and a gray pedal and by now, the safety pedal would have disintegrated. Nice machine; wonder what it looks...

Should be a pretty easy part to find; lots are available, even a used one will work, provided the springs are intact. Just a note, Min ... when you get everything functioning again, please make sure the wringer head comes to a complete stop before turning handle to lock in place. More of...

Not so sad ... see below! Good luck. http://www.ebay.com/itm/Maytag-Wringer-Washer-Index-Slide-Instructions-/172358016485?hash=item2821569de5:g:HbMAAOxyOlhStDeA