Search results

I enjoy using my Hotpoint range. I recently learned it's design family is the "Total Clean" ranges from Hotpoint and GE. The oven has Teflon panels on the left and right which are removable, and an enamel panel on the floor which is also removable. The burner controls are not multiple...

My brother's KUDS30IXBL1 has had difficulty filling after the first garbage flush cycle for about a year. He's been resetting it with the circuit breaker. It finally became ineffective and when he prompted for codes he got a 6-4, 6-2, and 6-1 (newest to oldest). He is puzzled because it does...

I have good service from my 1968ish HOT POINT 107RB 656J range However when the RR 6" burner burned out, it overtemped the copper arm in infinite the burner control, which now stays on all the time. It's too old for the normal repair parts sites to recognize Does anyone have a lookup Plist...

I'm cleaning out the garage for winter. Since June I've had a 1-18 that Goatfarmer picked up for parts. It's cabinite was rusty at the bottom, enough so that the right side wasn't connected to the base anymore. Kenny suggested I take it for parts since no one wanted it. What I found this...

My friends norgetag MAV6000 from 2005 was retired last week after chewing up the gears in the transmission. I did extract the pump, motor and console - but they may be tossed shortly. Would anyone have a use for the parts, the owners do not do ebay and just want to clean out the debris as...

I thought of the super unimatic when my brother in Fort Wayne mentioned having one of these. It is a cheap simple experimentors circuit board, but powerful. One writes a program in "C", and flashes it into the module via the usb jack. (There is a extensive open source library of code for it)...

FYI I find electrolux PNs help when searching for frigidaire washer parts Oil Seal Bellows 5305433572 The unimatic bellows is 5305433576 The 1-18 bellows is 5300638860 The lint filter is 5300633790

This week I worked on the clutch I removed from the 1-18 discussed in Thread Number: 35161 As you may recall it wouldn't spin up to speed, although the mechanicals seemed to be working alright. My disassembly of the clutch found a waxy black grease on the cams and a slick glazing on the clutch...

In Thread Number: 34465 Kenny/goatfarmer had a rusty dented 1-18. Things worked out that I picked it up sunday (Kenny and I both live here in South Bend)

The local news is following the 100th anniversary of Whirlpool video on WNDU news page http://www.wndu.com/searchresults?searchKeywords=at+100+whirlpool&group1=phrase&time=30&sort=date text http://www.wndu.com/home/headlines/At_100_Whirlpool_an_unlikely_success_story.html...

I'm posting this here FYI, in part because I think some would appreciate the metallurgy aspect, and in part because this problem affects many items using a Vacuum Fluorescent Display. The MPG readout on my used Chevy Venture never worked. It is located on the headliner between the visors...

I saw a A606 sudsaver at the Cleveland ReStore today. white, no rust, clean white tub with nice powerfin. I didn't take the front off to check anything else. soak, wash, retrieve suds, that's all that is on the dial. It wouldn't fit in my DodgeShadow, or I'd have 5 machines this evening...

I am in Cleveland for a few days. I dropped by Modern Parts House and met Larry and his wife (and 2 dogs & a new cat). They are nice and certainly welcoming. It is awesome to visit a parts store with so many years of parts. More interesting still is Larry's comments about any part one might...

I bought a clean A882 today, series 04. I was so happy to get it, since it has a helical drive. Until I fix my A606 I can use it. The mechanicals are almost identical to my A606. No leaks, no rust, damper pads are good, motor carriage rolls freely, agitator moves up/dn ok. I found that I...

"could you pull out the dishwasher and run it?" sure. Dishwasher into middle of room, hook hose and pw cord up. Get cascade soap from under sink. Squeeze bottle into 2 soap dishes. very liquid, not viscous. Shake bottle, same thing. With it this thin it just runs out of the soap tray when...

I read in a thread sometime back that IKEA had a hose kit to go with the Värde catinate. Anybody recall that PN? I've not seen it searching IKEA for hose kit etc. thanks Last year they didn't have any Värde cabinates, now that there's 6 in canton mi, I can get my KUDS21 going.

I've been checking the parts in my leaking A606 looking to see what might have been leaking. "If water is coming from the slots in the tub bearing, suspect a boot seal leak. Manual "If the water is coming out undreneath the bearing sleeve right down on the gear case cover, suspect a center...

My '74 helical drive A606 agitator may be cracked and require replacing. in Thread Number: 22347, near the end, a Maytag cork screw agitator is mentioned, used on the Norge Maytags? Is there one that would work in my A606? The helical drive has a 6 tooth spline. If not I'm in the market for...

My daily driver, a harvest gold maytag A606 washer from 72-74 era (no perm press on dial, just soak) needs service. When filling the water pours out of the cast alum boss where the transmission attaches to the tub. And the transmission is not happy either, won't agitate well. That explains...

I know it is somewhere in storage, but I didn't realize how irreplaceble it was. Hamilton Beach, Waring, Toastmaaster, Rival, West Bend....now who was it who made that thing. ok, I'll just browse with google. -hamilton beach hot plate- results = coffee maker dang, not listed. I found my...