macboy91si
Well-known member
I love Easy puns. So folks, I'm out of room and time at ye olde apartment. I have 2 Easy Spindriers, a 1-speed and a 2-speed with original documentation up for grabs. I would keep them, but my job and side business keeps me pretty busy and I just don't have the time or resources. I'm not familiar with the machines enough to really tackle them so I think they need passing on to someone who could work on them and enjoy them.
The 1-speed model is a mid-60's model, works great and cosmetically only minor rust spots (an Easy trademark). The pump bearing is bad and I'm not knowledgeable enough to repair it. The spin basket is the spray-cone system, but for some reason it does not come out? Some missing bits on front, oiled and lubed the motor bearings so motor is almost silent.
The 2-speed is a little more work, but is a nicer machine if one could get her up to snuff. It's a 1969 model top of the line 2-speed with an aluminum Spiralator. Cabinet also is not bad and the under-workings are clean. Unit works, but needs wash-tub to pump hose and some other things possibly. The aluminum agitator has worn down the drive block in which it sits so I added some vinyl shims to raise it up, I don't know how to fix that.
Anywho I'm asking $150 for both together as I need them gone. I'm actually taking a loss, but I'm critical for space and I don't think I'll ever get around to them. I hate selling them, but they're not small and I don't know enough about them to do a tear down.
[email protected]
-Tim
The 1-speed model is a mid-60's model, works great and cosmetically only minor rust spots (an Easy trademark). The pump bearing is bad and I'm not knowledgeable enough to repair it. The spin basket is the spray-cone system, but for some reason it does not come out? Some missing bits on front, oiled and lubed the motor bearings so motor is almost silent.
The 2-speed is a little more work, but is a nicer machine if one could get her up to snuff. It's a 1969 model top of the line 2-speed with an aluminum Spiralator. Cabinet also is not bad and the under-workings are clean. Unit works, but needs wash-tub to pump hose and some other things possibly. The aluminum agitator has worn down the drive block in which it sits so I added some vinyl shims to raise it up, I don't know how to fix that.
Anywho I'm asking $150 for both together as I need them gone. I'm actually taking a loss, but I'm critical for space and I don't think I'll ever get around to them. I hate selling them, but they're not small and I don't know enough about them to do a tear down.
[email protected]
-Tim
