Hello all.. We have a really old Hoover Logic 1300 Washer/Dryer that's been in the family for about 30 years! Recently it started tripping the RCD so I stripped it and found the metal shield on the front motor bearing had become dislodged and was contacting the armature windings. I have stripped the motor and replaced both bearings but it seems the shorting has damaged the armature coils... Anyone know where I might get a new or good secondhand motor or even just the armature coz I would really hate to scrap this lovely old machine as all that's gone wrong before is a pump failure which cost all of about a tenner to replace. The number on the motor is 43174-621 (240v) and the OE Hoover number is 677572... Any help and/or advice will be much appreciated as SWMBO is pressurising me to just get a new one and I really don't wanna fork out my hard-earned on a piece of modern Sh**e if I can help it!
Hoover A8552 motor
- Thread starter griggrog
- Start date
Help Support :
electron1100
Well-known member
Hoover Parts
Try this lot they mau be able to help, or keep searching for Hoover Logic 1300 on ebay
Good luck
Gary
Try this lot they mau be able to help, or keep searching for Hoover Logic 1300 on ebay
Good luck
Gary
As an eBay Associate we earn from qualifying purchases.
davetranter
Well-known member
Photograph
Is there any chance of a photograph of the motor?? I have a stock of old motors, but have no idea which machines they are from. A photo for initial identification, plus the Part No. should give a definite answer. If I have one, it's yours for the postage, plus a couple of quid.
All best
Dave T
Is there any chance of a photograph of the motor?? I have a stock of old motors, but have no idea which machines they are from. A photo for initial identification, plus the Part No. should give a definite answer. If I have one, it's yours for the postage, plus a couple of quid.
All best
Dave T
