KDS 15 WORKING!!!!!!

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

norgeway

Well-known member
Joined
Apr 28, 2009
Messages
9,376
Location
mocksville n c
Well, after talking with our resident expert in appliance service, John LeFever, I tackled the Kitchen Aid, On his advice, I replaced all the hoses as they were brittle, it is currently working without the overflow protection switch, and after adjusting the water flow so it wouldn't overflow it works great, I seem to have one problem, that I will see about next, the main wash dispenser cover will not latch in the closed position, so that is next on my list, I will install the new pressure switch as soon as it arrives.

norgeway++4-4-2012-11-03-11.jpg
 
about ready!

A little modification...I took the insulation off the Whirlpool, cut it to fit and glued it to the sides top and back of the KitchenAid!

norgeway++4-4-2012-11-09-28.jpg
 
Wow - well worth the $12 investment, I would say!!  Congratulations on a fine machine saved, Hans!   I am patiently waiting for one of these babies in turquoise to surface.... 

Hope it will serve you well for many years to come!
 
It did in my KDS-17A

Now I get to hear all the good sounds like the timer clicking and the water moving around and don't need to hear the motor too much.  I have a Kitchen/Great room and I was concerend the Dishwasher would be noisy but the insulation made a big difference.  We did the top, sides and the lower panel.
 
So glad you got the water switch temporarily resolved so the machine runs. It's a beauty that's for sure. I'll bet the insulation will help with keeping the water hotter too.

Very nice Hans!

Patrick
 

Latest posts

Back
Top