Need information on replacing brake bolts on GE Filter Flo

[tinkr]

I found this washer and seller says needs bolts replaced on brake. I looked in the archives and didn't find the specific information. If I missed the thread sorry.
any help would be apperciated.

 

[yogitunes]

lets try this again of who's who.....

your thread title mentions a GE Filter Flo

your posted pic is of a Norge.....

two machines definitely not interchangeable ....

something is lost in translation....

 

[akronman]

Not GE at all

That is a Norge built washer, it has nothing to do with GE.

Try these pics and try this link to get you to the brake solenoid area of your machine, see if some bolt is broken. Take pics along the way, we will see what we can help you with. And a clear picture of all the controls is always fun.

Cinci to Akron Ohio Norge

It works! It's also dirtier than hell inside the outer tub. Volvoguy got the machine wth a spare motor, knowing the original was either shot or nearly so. I let it sit in the basement about 9 hours at 65 degrees to warm up, all the pulleys and belts turned nicely, so I put it in spin and...

www.automaticwasher.org

 

[tinkr]

Well I guess the seller didn't list the make of washer

the ad said General Electric dryer hum and the dryer panel was clear and GE.
Well... any who... Thanks for the info. Don't think I can convince my other half into this.
Didn't sound to promising.

 

[goatfarmer]

Still a somewhat desirable washer.