pturo
New member
My Talltub started making noises lounder than my garbage disposer, all through the wash cycle. I felt around the bottom and nothing, ran it again, still a hard grinding noise.
I took off the wash arm, impeller cover and nothing in the impeller chamber. I then took the impeller off and it's chamber and below is the grinding chamber, well!!
A little ball of wadded up aluminum foil, some beat up Saran Wrap shreds and a piece of rubber that looked really familiar.
On the tall tub door, at the left and right is a rubber insert that seems to be some sort of dam between the tub and the door. It is sort of clamped between the outer door and the inner door at the bottom, about 1 and 1/2 inches long by 3/4 wide with an exposure of about 1/4 inch to 1/2 inch. My right one was missing, it's in bad shape ground but not devoured by the disposer blade.
What is this part for and what does it do? Should I be concerened to operate the thing without the rubber thing intact(Ok lets not go there on the double entendre)
Phil
PS, don't let guests load your dishwasher after Martini time.
I took off the wash arm, impeller cover and nothing in the impeller chamber. I then took the impeller off and it's chamber and below is the grinding chamber, well!!
A little ball of wadded up aluminum foil, some beat up Saran Wrap shreds and a piece of rubber that looked really familiar.
On the tall tub door, at the left and right is a rubber insert that seems to be some sort of dam between the tub and the door. It is sort of clamped between the outer door and the inner door at the bottom, about 1 and 1/2 inches long by 3/4 wide with an exposure of about 1/4 inch to 1/2 inch. My right one was missing, it's in bad shape ground but not devoured by the disposer blade.
What is this part for and what does it do? Should I be concerened to operate the thing without the rubber thing intact(Ok lets not go there on the double entendre)
Phil
PS, don't let guests load your dishwasher after Martini time.