repairguy
Well-known member
In Storrs Center, CT
$300
$300
Smaller Frigidaire Portable Dishwasher
- Thread starter repairguy
- Start date
Help Support :
Been There and Done That!
Mine had Kenmore badge, but those 18" dishwasher all came from same source.
Decent enough for what it was, but glassware in upper rack usually had yibbles inside no matter what you did.
Not bad otherwise, I mean it beat washing dishes by hand, but due to size capacity was somewhat limited. Large pots,pans, bowls or anything else were just not possible. The center tower design limited what could go in lower rack, and lack of space in top did same.
When it died (mount for wash arm rotted off), took off the casters, top, and some other bits, then hauled the carcass to curb.
Mine had Kenmore badge, but those 18" dishwasher all came from same source.
Decent enough for what it was, but glassware in upper rack usually had yibbles inside no matter what you did.
Not bad otherwise, I mean it beat washing dishes by hand, but due to size capacity was somewhat limited. Large pots,pans, bowls or anything else were just not possible. The center tower design limited what could go in lower rack, and lack of space in top did same.
When it died (mount for wash arm rotted off), took off the casters, top, and some other bits, then hauled the carcass to curb.
As Launderess can attest, it was not worth $300 when new. It was designed on the cheap to be sold to people who knew nothing about physics or dishwashers. It would work if WAAY under-loaded.
firedome
Well-known member
18" dishwashers...
we have 2, there's not much choice as virtually all are made by Danby. Ours are labeled GE and Frigidaire, they work decently, but they're no Hobart KitchenAid or Whirlpool Power Clean, that's for sure
we have 2, there's not much choice as virtually all are made by Danby. Ours are labeled GE and Frigidaire, they work decently, but they're no Hobart KitchenAid or Whirlpool Power Clean, that's for sure
If ever could find a way to make those 18" Miele built in dishwashers a portable, would have one in an instant.
Knew my Kenmore 18" unit was made by Frigidaire because of the code on tag inside. Back then you only had to see first three or so numbers of model to know who made what for Sears.
IIRC "110" was Whirlpool".
http://www.applianceaid.com/sears-manufacturing-codes.php
Knew my Kenmore 18" unit was made by Frigidaire because of the code on tag inside. Back then you only had to see first three or so numbers of model to know who made what for Sears.
IIRC "110" was Whirlpool".
http://www.applianceaid.com/sears-manufacturing-codes.php
