What is it?
So What Is It?
- Thread starter Unimatic1140
- Start date
Help Support :
exploder3211
Well-known member
- Joined
- Dec 24, 2006
- Messages
- 1,664
Hotpoint.. Read the belt.. Says it right there..
exploder3211
Well-known member
- Joined
- Dec 24, 2006
- Messages
- 1,664
LoL not ment to be snappy btw
Its an early Hotpoint
LaGonda 2000??
LaGonda 2000??
magic clean
Well-known member
- Joined
- Oct 15, 2004
- Messages
- 511
Perhaps a hybrid
of a GE - Hotpoint. Maybe even a different brand name on the console??
of a GE - Hotpoint. Maybe even a different brand name on the console??
Not a Hotpoint
OOO - OOO - OOO! Pick me, pick me!
You'll die when you find out what it is!
OOO - OOO - OOO! Pick me, pick me!
You'll die when you find out what it is!
rolls_rapide
Well-known member
Then tell us - the suspense is killing me! LOL
exploder3211
Well-known member
- Joined
- Dec 24, 2006
- Messages
- 1,664
Hmmmm.. 1/2 Hp motor, hotpoint drive belt, ok....
That sure looks like a ge machine to me
Hmmmmmmmmmmmmmm
Hmmmmmmmmmmmmmm
Here's you next hint:
When you select Cotton/Linens you get a <font color = red>HOT Wash</font>, then a <font color = Blue>COLD Spray Rinse</font>, then a <font color = Blue>COLD Rinse</font>, and then a <font color = red>HOT Spray Rinse</font> in the final spin.
When you select Cotton/Linens you get a <font color = red>HOT Wash</font>, then a <font color = Blue>COLD Spray Rinse</font>, then a <font color = Blue>COLD Rinse</font>, and then a <font color = red>HOT Spray Rinse</font> in the final spin.
well it says it has a 1/2 HP motor. *LOL*
The tranny and the pump coupler do look TRES GE to this untrained eye...
The tranny and the pump coupler do look TRES GE to this untrained eye...
Is that an off-balance switch that *beam* hits to shut off the spin? Or is it simply a buzzer of sorts?
Hmmmmmm is right----I'd forgot all about this critter!
exploder3211
Well-known member
- Joined
- Dec 24, 2006
- Messages
- 1,664
What in the world? Something made by hotpoint co?
That's an awfully tall looking transmission... Perhaps the agitator doesn't oscillate? Maybe... just maybe... it goes say... up and down? 
filterflo
New member
Wizard Citation, design by Franklin.......
Ding, Ding, thank you Jimmy, you got it! Yes it looks like a GE Pump coupler, but it's a Franklin pump coupler actually. And I have no idea why there is a Hotpoint belt in this machine, someone obviously had worked on this machine before and figured out that a Hotpoint belt was the same size as a Franklin belt.
Yes the "PIG" as I lovingly call it is now out of storage, home and installed for a while to play with. Unfortunately the pump seized up while it was in storage and the timer needed to be repaired, so that is what I had been working on for the past four nights, but tonight it did it's premier wash load tonight, at least as well as the Pig can!
Yes the "PIG" as I lovingly call it is now out of storage, home and installed for a while to play with. Unfortunately the pump seized up while it was in storage and the timer needed to be repaired, so that is what I had been working on for the past four nights, but tonight it did it's premier wash load tonight, at least as well as the Pig can!
Here he is washing a load of towels, the lower front panel is off so I can check for leaks, not a one YAY. I had to fight with the poor dear for the past three days trying to get the supports that are welded to the outer tub that hold the pump in place to stop leaking. There were pin holes underneath the welds at the bottom of the outer tub, oy!
