They Have Finally Arrived

[xraytech]

Well after 2 very long weeks of anxiously awaiting my brand new Speed Queen set came in, Both locations of Sprowls City were out of all of their Speed Queens so I had to await their next shipment.

I took delivery of an AWN412 washer and matching ADE3LR dryer.

Here is a picture of them in their new home right before their first wash

 

I absolutley love these, such an improvement over the 2001 Kenmore 80 series they replaced.

 

[xraytech]

So can anyone here tell me a way to bypass the lid switch so I can enjoy watching it wash

 

[xraytech]

Open wide

 

[xraytech]

Inside of dryer

 

[qualin]

Congratulations on your purchase!

There are a few google searchable threads on how to do that.

I'll save you the trouble... see the link below..

Please note, I cannot take any responsibility for any carnage, death, mayhem or other horrible things that could happen by doing this.

How do you bypass/disable the lid switch on speed queen washers?

how?

www.automaticwasher.org

 

[circlew]

Congratulations on your new set, those are very nice.

 

[llmaytag]

New Set

I'm sure you'll be happy with them. I'm curious to hear your review of them after you use them a bit.

 

[pulltostart]

Congratulations on your new pair! They look very familiar....

Enjoy.

Lawrence

 

[mrb627]

Congrats...

Well worth the wait!

Malcolm

 

[aldspinboy]

Congrats on the new standerd ...

My friend just received his pair last week ..got to get over there to see them.

I'm glad you got them.

 

Darren k

 

 

 

[yogitunes]

they beat me to it....but a simple clothes pin works...

and you know how to adjust the water level higher right?.....

 

[teknikleespekng]

Congratulations! Looking forward to hearing your reviews

 

[xraytech]

No, I don't know how to Adjust the water level higher

 

[tomturbomatic]

Congratulations!

I think you should make it a SQ trio and get them the FL for company.

 

[xraytech]

Oh, no front loaders for me. However I would be happy to make it a trio with a Speed Queen wringer

 

[yogitunes]

unplug unit.....remove the five screws from the back of the control panel.....remove panel.....using a nut driver, turn the pressure switch screw 1/2 turn at a time, plug machine in and let it fill, not high enough?, give it another turn, and turn water level knob to reset, and let it fill some more, keep doing it until you reach the level you want.....usually to the top of the agitator vanes is a good level

when set.....empty machine and run a full load and wash cycle.....monitor the machine, and if set water level is fine, you can replace the rear panel........

1/2 turns at a time get you started.....fine tuning may be needed when you get close to the level you want......but easy enough to do....

mine is an older version....oddly enough, I had to lower my level....

do you needs pics?......

 

[mercman]

Congrats

Congrats on your purchase, we just bought the same set about 2 weeks ago. I think the Drier is outstanding and the Washer is good, especially compared to what else is available today. I might try my hand at writing a review soon, "we'll see".

Matt

 

[norgechef]

Take a video

and post it on you-tube.....i am considering getting one of these machines and would like to see one in action.

 

[moparwash]

They look great!

Too bad you can't bring them to the Wash-IN