Wowee 1950's Lifetime SS Cookware is Boss

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

jetcone

jetcone

Well-known member
Platinum Member
Joined
May 2, 2001
Messages
7,678
Location
Schenectady-Home of Calrods,Monitor Tops,Toroid Tr
Just got my "new" Lifetime SS pressure cooker. It weighs a ton! 16 pounds.

I'd say its early 1950's as it matches my other Lifetime cookware from the same era that is also SS.

All this 1950's Lifetime ware is magnetic so it all works on my induction cooktop too !

 

Just cleaned it up today. She was a grimy cook !

 

I bought these 1950's pieces as larks but now that I am using them they are fast becoming some of my favorite day to day cookware!

jetcone-2016010620232704029_1.jpg

jetcone-2016010620232704029_2.jpg

jetcone-2016010620232704029_3.jpg

jetcone-2016010620232704029_4.jpg

jetcone-2016010620232704029_5.jpg

jetcone-2016010620232704029_6.jpg
 
Lifetime!

Is GREAT cookware, Dinah Shore used to advertise it.All that door to door stuff made back then was wonderful, and a lot of it still is, Townecraft, Aristo Craft, Vita Craft, Permanent,Wear Ever, Health Craft. and ON and ON.....
 
Jon that is such an amazing pressure cooker!  I had no idea

that Lifetime was being made that long ago!  I have a set of

Lifetime pots that my Mom bought from a door to door sales

lady in the 1980's.  She never used them that much so I took

them when I moved out in 1985.  I love the set and it is true,

they do last a Lifetime!  The pots and even the handles look brand

new.  The set I have have been used on electric, gas and now Induction.

Great find you have there!  It is beautiful!

 
 
All those door to door cookware brands..

Are wonderful, if terribly expensive, I still think they are worth the cost if you really cook, everyone is going nuts over All Clad, but to me, its no where near as good as any of these door to door brands, I have a set of Aristo Craft from the late 50s and its great.
 
From Greg's post I followed the link to the Saladmaster website. Interesting that they are still around. Annette's mother has a full set of the all aluminum Saladmaster cookware from the 50's.

Of course being a door to door sales company they don't state pricing. I have a hunch that it is sky high. They go on and on about all the advantages of 316Ti stainless interior. Apparently they think they can fool people into thinking that alloying a little Titanium into 316 stainless makes it better suited for cookware. Unless you get your cookware to 900 deg F on a regular basis the added Ti is really just a marketing advantage.
 
I have a complete set of Salad Master cookware at the beach place, from wife's grandmother. It took some learning how to use it. It is slow to heat up but retains the heat and much lower cooking temperatures. I check the website and they show that if you ever have a problem with them, to return and they will correct or replace the item. They even offer a service, send them the pots and pans they will clean and polish and replace handles and knobs and they will look new again. Don't know that the price for that would be, but these are going on 2nd generation and they still look like new. I think a great deal for the money originally spent.

Jon
 
NOTE!!!!The Titanium will withstand LESS heat than the SS part of the pot.Note that jet engine/gas turbine blades are ALWAYS made from high grade STEEL-not Titanium.Titanium is for jet engine-gas turbine FAN& COMPRESSOR blades!Titanium will soften when exposed to 900 degree heat.
 
Rex,

The new Saladmaster cookware doesn't have a Titanium lining. It is lined with 316Ti alloy stainless steel which is simply 316 stainless with a bit of added Titanium to improve its properties. The only real improvement is corrosion resistance at temperatures FAR above anything cookware would encounter. It is pure marketing, like a "Titanium" MasterCard. If it is Titanium, it has to be good...

In any case, the strength of the metal from which cookware is made is a moot point as it isn't ever stressed nor does it ever see temperatures over about 500F or so. Aluminum is weaker and has much lower hot strength but makes fine cookware :)

Please forgive the offtopic rambling
 
That maybe all true Phil

but I find the finish in these direct market pans to be of a much higher standard - they tout "surgical steel" wether thats true or not -  in reality they are so well polished that they are non stick if you use them as directed - "medium to low; is all ya need to know". And nothing ever sticks , and they clean up better than non stick cookware.

 

So there is something to be said for the higher price point. Once I got my pans and started using them, I gave away my All Clad. No comparison.

 
 
Jon,

I'm not saying that Saladmaster doesn't make a great product, or that they don't provide excellent service etc. They may even be a good value, but without jumping through hoops I don't know the pricing. To me that says "beware"...

The 316Ti thing is a second beware in my mind too. Its more justification of potential over pricing. Sell the product based on quality and service you offer, not on spurious buzz words that mean nothing.

It's a lot like the Titanium Nitride coated gold drill bits that you see at all the home stores. Making cheap Chinese drills pretty with a super thin layer of Titanium doesn't make them a good drill but it sure helps market them to the unknowing...
 
All of

The cookware sold door to door or at parties like Tupperware, is extremely high quality, I have a piece of Cordon Bleu I bought at the goodwill,believe it or not, and it is 7 ply, it cooks perfectly even ,about all of these brands are made by either Regal or West Bend, and they stand by their products, Ron Jones had some 1950s Vita Craft that needed handles, they sent them no charge, not only did they have the parts, but they stood by the guarantee over 60 years later!Doesent matter which brand you get, Saladmaster, TowneCraft,Vita Craft etc, they are all good, no way they could sell them at the high prices they charge and stay in business if they were not better than just about anything.
 
I have some AllClad pans I bought from Belks years ago-work fine for me.Never seen DTD cookware-Did fall for a Cutco DTD knife/utensil salesman-best kitchen tools I have-they were worth it.
 
Phil I didn't think you were

I was just adding that sometimes the higher price does mean higher quality. But saying that I would never buy these items new, used on ebay or estate sales they are a steal!

They hardly wear out, you can still get parts for them and they still perform in a superior way.

 

Yes I agree just slapping some titanium on a drill doesn't make it a good drill at all !

 

Now I do buy Cutco direct from little cut Cutco College Boy. He delivers !! 

 

I know Greg is notorious for buying broken Cutco at estate sales and getting it replaced with NIB pieces. I never see it at estate sales here.

 

 

 
 

Similar threads

T
NYT on Induction Cooking
Replies
11
Views
12
combo52
combo52
M
Some thoughts on my Miele Little Giant Washer and Dryer(s) - a year later
Replies
5
Views
6
suburbanmd
S
B
More on Disposals (for disposal lovers only)
Replies
19
Views
20
tolivac
T

Latest posts

Back
Top