Recent content by Sudster

Check out thread #81875 in imperial it may help you figure a plan--Joe

Thank you all    Good point on the missing lens in 75. Mine is a 72 . What I'll do next on a A310 top is:   1---The indentation is there but no lens. I'll drill a hole in each corner of the indentation gradually stepping up to about 3/8. 2---I will then cut the straight parts out with my...

Very cool video thanks   My thoughts are :    Impractical for home use and my lasagna pans and plastics at 180 degrees plus    Where would I store all these specialty racks?     50 amp breaker ??      This is strictly a sanitizer--But very cool--Thanks for posting it

Thanks Chris,              All you need is lid switch 206415 or 2-6415 , It has 3 terminals. Wire yours the same way it is now only the new top switch terminal will be black + to the light. The white from light will go to L2 on the back of your timer. There should be a spare terminal unused. ...

Zoom oil Zoom spout

Also watch this video on the correct 2  belt replacement  

Would you explain tub indexing please Dan ?

Michael ,               No hole at all. After the front top bolts are removed the entire top assembly is raised  and you will see the clear lens on the top drum . The light is attached to the top underside lid shining DOWN . The light does not rotate nor does the top or cover. The inner tub...

Last pics of 806 It turned out pretty well,Not perfect,But I am happy--The Turquoise A702 is next and I will name it Benny in honor of you know who. It will be very entertaining. --Thanks to Robert for the knowledge and the access to it !! [this post was last edited: 1/21/2021-22:16]

last pics Although the bleach injection is rigged,It works well without back up or leakage. That's sloppy of me to leave silicone grease on the tub . I used it on the new top tub seal. Yes there is plenty of tubing with enough fall for spin and out of balance spin, You'll notice the bleach tank...

Last pics of 806  I have ran 4 loads and not one leak or squeak, I am working on someone to help with the video . Here are the last pictures of the 806    1 believe placing the harness in wire loom should be the norm on these old machines, And John--I changed to an LED tub bulb and it made a...

Thank You ALL !! I will post  a YouTube video in the next few days and provide a link here. Joe

Only a couple things left  but I need a quality drain hose. What are my options? I don't care for the cheap ribbed kind. Opinions please!

Now this is homemade but it worked out great. I used some 1-1/4 aluminum angle and lamp parts from Lowe's. I soldered and used heat shrink for a harness and used a 3m epoxy that I had along with a 25w bulb. I changed out the lid switch for the correct part . The tub pic was taken in the dark.

99.9% I just turned 60 and it seems as though it takes me all day to accomplish 2 things .   I rebuilt the injector assy. with all new parts & hoses. That black is not silicone it's the KBS rust paint .