Search results

Hey could you post some pictures of the inside? What do you want for it?

OK Rember way back when I was really young seeing a dryer that actually had 3 belts if you can beleive it. But can't figure what it was Form the back with back cover removed the motor was in the bottom Left hand corner that had a double groved pulley on belt drove the blower in the bottom right...

no sound really just a 60 cycle hum..no woo or whine..or anythung like that

Well I got the most of the Calcium, Lime and rust cleaned up on all the parts. I say most not all. Seems like the leak is gone. I put the machine back together and it looks like it is working!! Man cleaning that Lime was a BIG job! Now one thing when it goes into agitation it seems when the...

Well running it with wather in it (Without the inner tub) and so far no leaks... we will see..

I removed the Agitator Block then I took out the 4 screws at the bottom of the outer tube and remove the side hoses. Then I went under the machine to remove the Manifold and cleaned it out. Then I removed the outer tub. I bought 1) Centerpost main seal 2) the Tub repair kit that comes with the...

I look through this restoration process under the photos and did not see where it gave details on how to remove this.. I saw how to remove the block by heating it up. But did not see how to remove this brass nut..

OK so how do I get this littel Brass threaded screw off? does it screw on and off the normal way? Do I even have to take it of the remove the block?

How does one remove the Funny cone shaped hex Agitator block? Looks like I am going to have to replace ALL the seals to stop the leaking... But this agitator block has been the biggest Mystery..

I called Fox-appliance here local and they gave me part numbers for all these parts I needed. Then I did a Google in Whirlpool and that particular part number and you will run accross some distributer that has some old stock... The Seal was the last one they had on the shelf!! ebay also has...

Well I spent money today... I bought a list of stuff 1) New input water valve where Hot and cold water hoses connect 2) New Belt 3) New gasket for the leak around where the inlet hose goes at the bottom of the outer tub for the circulation pump. 4) New Clips to hold the top tub ring down. 5) New...

Thanks Man!! I will.. yeah I was pretty happy to know that it agitates now. I wonder if I can get this littel black rubber Gasket from the appliance parts place? Garrila glue? Well I have to get some JB Weld to fix the crack and hole in the lint dispencer filter... now I know I cant get another...

Wow yeah right now thing are cooking hopfully things will continue to roll! I pluged the machine up and turned the dial to where the motor was running and pushed the plunger up and that little post dropped down and it srarted agitating! As far as the rust goes I have been using and round wire...

Yogitunes your a Genious!!! Thanks big Dog!!! Now after I sprayed the WD40 and worked the plunger up and down I wonder if this will work from here on out... Is there a such a thing as changeing the oil in the tranny? How is that done? I mean there is 50 year old oil in there..

I'll try to shoot it with some WD40 and see what happens..

Hey Yogitunes! I do see what your talking about!! I did what you told me and yeah...It AINT going down (southern talk there lol). It still stays up! for some strang reason...Is there supposed to be a spring to push this rod down? What could it be? WOW good call man!

Yogitunes, your not confusing your helping ALOT...I will try that tonight in the Garage with my son and give you details of what I find before I go to bed. It is intresting, I was looking at some photos on here of some trannys and I could sort of tell how the agitation works sort of.. The big...

Yogitunes alright check it out.. Do you know of a whole kit that includes drive unit? What is CLR?? You say I can remove the tranny without removing the Spin drive stuff? Maybe going into the tranny is something simple to fix.. Would I need to remove that Cone shaped six sided piece that...

RevinKevin, I see where your soliniod plungers are not moving in and out of the lower slots. When it try to de-energise and move to the lower cam slot it jumps back out. This is NOT what is happening with mine. the soliniods move in and out of the CAM slot and move them in and out fine. It is...

Well Yogitunes really at this point I really just want to put a whole new tranny in and move on. There is so mich eles wrong with this machine you would not believe. If I could mark this one of MANY MANY issues off my plate on this. I would really feel a Moral victory. If I know where I could...