OK guys here is where I am 1966 whirlpool

[1966_mustang]

I removed the Agitator Block
then I took out the 4 screws at the bottom of the outer tube and remove the side hoses.
Then I went under the machine to remove the Manifold and cleaned it out.
Then I removed the outer tub.

I bought

1) Centerpost main seal
2) the Tub repair kit that comes with the 4 new bottom screws with the 4 gasket washers
3) Boght a new gromet for the bottom drain
4) got a new Gasket for one of the side filter inlet pump hoses.

I cleaned the out tub of where the holes were.
I used the Blue RTV sealer on EVERYTHING. Inside and Outside the center-post gasket seal, on the drain Gromet gasket, on both sides of the rubber washer gaskets for the four screw bolts.

Put the drain maifold back on.
Tomarrow, I will take the hose from outside and fill it up and see if it leaks anymore. THIS WILL BE THE REAL TEST!!!!!!

 

[1966_mustang]

Well running it with wather in it (Without the inner tub) and so far no leaks... we will see..

 

[frigilux]

Here's hoping the machine has no leaks and you're able to put it all back together and start having fun!