Search results

Chris Moore No idea who that is.

2 o'clock position Yes, thank you, I realize it's not the very rear but sort of the rear-right corner. Wow, so the same setup essentially could be done on a newer machine, just need a longer hose. Probably explains right there (partially) why they switched it eh? Mainly though to make...

Something else I noticed on that machine in the video, the top panel is the same as the ones used on the 24" BDs of that time as far as the spacing between the lid and the edge, so it must have been hard to externally distinguish between a DD and a BD without looking in at the tub and agitator...

Sean, I wonder if it was to perhaps emulate the BD design? Motor on those were in that same vicinity in the back.

Found one! So this has been on YouTube a little while, but someone has a Kenmore with that gold agitator! John L: You'd know since you restored that 81 Whirlpool, how are the drain hoses routed on that one? Like from the tub to the pump, and from the pump to the back panel? Since they're...

Combo52, Bottom position toggle switch for low, top position for medium was my thinking. That way, it would only work if the machine is set to a delicate agitation cycle, and be dormant in heavy duty. That I'm all well aware of, but then I wouldn't have a woodgrain 3 speed Kenmore with mostly...

Nope!

Does anybody have a diagram for a 3 speed Whirlpool direct drive without a speed selector switch? Trying a mod on my 1992 Kenmore 70 series, 2 speed-to-3 speed conversion. What I've found is that most 3 speed motors have a separate connector for the med/low speed with White>Violet being...

chetlaham & Sean The one we have now is a 27" Lady Kenmore from 1988. My parents are wanting to find a matching dryer to this 2006 Whirlpool direct drive we just put in. I know I've seen some 27 inchers in the slightly older silver panel models from circa 04-05. Sean, you said that filter...

Does anyone know... If they made 27 inch dryers circa 2006? Would like to find one to match my new machine.

That's interesting info. Any elaboration on what a cavity ID is? Thanks.

Sean: Hadn't thought of that. That's plausible!

What the "WC" number stands for on a drain pump? Some of them differ from each other so that's why I was looking to see whether it was a year code or a revision code or what. One Google result was that it could stand for "water column"? If anyone knows by chance and is willing to impart info...

Thread revive: I just bought a NOS pump myself! Date code: 911010 Should be arriving Monday the 9th.

I know why he left. In the interest of not raising drama here though, won't disclose why.

Old thread I know, and he'll probably never see this, but it's cool to see a small snippet of the underside of that machine and what it looked like. The infamous "1990 Whirlpool Washing Machine" previously owned by YouTuber Sharkie626. That machine with the way the laundry room setup was and...

Thanks Glenn! 2009 it is!

Thanks Eddie. Couldn't be any older than 2007, but I think the thicker tub ring might indicate 2010 or newer?

Great personality, spunky, clean, good looking, would be a great partne--wait......... JK lol If anyone could tell me the year this machine was made, I'd appreciate it very much. 43rd week of 20XX. Thank you!

Thanks all for your suggestions! And thanks Mel for the year! I still don't understand why Whirlpool changed their serial numbers, they get confusing after 2001 or so.