Search results

'78 must have been a typo Right - that silver T-bird is a '68.

You are welcome.  The more potential sources for part substitutes that can be archived here, the better. 

Greetings everyone: I wanted to post a link to a company that manufactures gaskets that might be able to help out with some of the ongoing issues that people here at AW have locating replacement gaskets and seals. This company was mentioned on another board that I belong to dealing with classic...

Adjust water level Hopefully the water level switch will still allow a level adjustment like the one in our Maytag Epic (Duet clone) in spite of the electronic controls.

Point of clarification: One part# for all of those models? Out of curiosity, does the instruction sheet with the door gasket actually say that one newer part number supersedes all of those part number/model combinations or is it just that the installation instructions apply to all of the models...

Strange noise, no spin Maybe it just has a bad motor coupler. If that is bad, it will not agitate either. The comment about a strange smell is a bit worrisome though. When a coupler fails, I don't think there would be a bad smell unless the rubber part somehow got hot from friction when it...

Great performer We have a KUDM25 from 2000 (same style control panel and pump/motor/wash arms with fewer cycles) that has always been a great performer and is quiet. The only weak spot that it has had has been the lower wash arm nylon bearing. I have replaced this a couple of times since...

Speed Queen pink control panel The pink control panel models were a limited edition as part of a promotion last year (see link). Andrew S. http://www.speedqueen.com/home/en-us/breast-cancer-awareness.aspx

Dual action agitator from an Amanatag in a Speed Queen? On a related note: Because of what I assume to be some shared lineage between the current Speed Queen machines and the late Amana-designed machines, I wonder if a Dual-Action agitator from a Maytag "Amana-tag" "SAV..." model numbered...

Oil on car seat Greetings: Best of luck with your new wringer project. Regarding the oil on your car seat: Can you remove the cushion/seat from the car easily? That may make it easier to deal with the problem. Is it a fabric seat? Leather? Vinyl? If it is a fabric seat, I would try...

SP = 1960, October Looks like it was born in October, 1960...

DG700/701? Since that has the "gold dots" on the glass panels instead of the stripes, wouldn't that be a DG700/701 instead of a 641?

Many parts made in-house by Maytag That is interesting Ben - I didn't know that Maytag made most of their own parts in-house. I wonder if anyone who worked for Maytag belongs to the club and might know if the door seals were sourced elsewhere or were made by Maytag. Andrew S.

Original manufacturer of Maytag dryer door seals (?) I wonder if anyone knows who made these seals for Maytag? I doubt that they were made in-house. If they are still in business, perhaps they have the dies and could make a few... Andrew S.

Similar gasket on Ebay This may be from the lower line Highlander models, but here is an NOS gasket (312231) on Ebay that might work on your 702. Maybe someone else here would know for sure if this can work. I think the gasket that you need is a 302448. Maybe Larry in Parma still has one...

Maytag HOH dryer door seal I wonder who made the original gaskets for Maytag? If that company is still around, maybe they can still supply the gaskets(?) If you can't find an NOS gasket on Ebay or from a parts supplier, maybe something like this can be substituted...

Oil viscosity chart Here is a link to an oil viscosity chart. Automatic transmission fluid isn't called out specifically on the chart, but Dexron III is roughly equivalent to an SAE 0W-20 multigrade engine oil from other things that I have read. As you can see, SAE 90 gear oil is roughly...

Early Maytag DW door gasket on Ebay Quick follow-up:   The link below is to what I think is your door gasket on Ebay.  It is Maytag part# 900311.  Since these are no longer made, I would jump on this if you are serious about keeping the machine.   Andrew S...

Early Maytag dishwasher door gasket Hi Lauri:   Your best bet locally would be to find an appliance dealer who handles Maytags that has been in business for a long time.  They might have the gasket as a "New Old Stock" item on the shelf as it is likely discontinued at this point.  If you can...

Hard to start lawn equipment I think this is a potential problem for all brands now because of lean carburetor settings for emissions as well as the ethanol content in most gasoline.  Your best bet with any 2 cycle engine these days is to mix up small quantities of gas (gas with no ethanol in...