Search results

Any chance to get photo of the agitator model?

Any chance to get photo of the agitator model?

TL H-axis also have safety door lock ! Most modern washers, including TL H-axis, have safety door lock during the wash phase as well as during the rinse and spin phases. One needs to stop the washer first before the door is unlocked. Of course, you could always fool or bypass the door switch...

Very good observation/comment from designgeek about the white paddle. My son told me that this white paddle is screwed with TORX T20. The drain outlet hole on the outer tub could be inspected by removing this white paddle. I would speculate that the indentation on the door may also act as...

Seek help to locate/obtain the parts diagram for SQ LTS85 or Huebsch LTZ85. Thanks.

Height of standing pipe? What is height of your standing pipe? Is your Duet on pedestal? The recommended height of standing pipe for most FL without pedestal is 24" to 36". If you add pedestal, you need to increase the height of the standing pipe. The recommended height of standing pipe for...

TX898 auto wash and dry My son replied: "Yup. That is possible. Can combine with 1-19 hours delay, eco care, sleekare setting too." So it confirms that TX898 could be programmed to wash and dry in one go.

I am also skeptical at the one paddle TX898 because most of all other washers and dryer have 3 (or more) paddles. We could not question its washing performance because it is a modern machine with top class A washing performance as awarded by IEC. I think that the washing and drying could be...

My son's reply. My son said: "There are no other objects other than the removable (not likely, as you need a "star-shaped" screwdriver") paddle at the bottom of the drum." So TX898 has only one small paddle at the bottm.

I think OP wants Euro-size (about 24" width) machines. HE-2 is a full-size (about 27" width) and an viable option if he/she relaxes the width constraint.

Maytag 2400 is made by Samsung and they have more experience in making such Euro-size FL (but not full-size one) for the Asian and Euro markets. IMO.

Would agree with you that Maytag 2400 pairs is the front-runner in this group.

Soft-mount for HE washers? Is it a trench for new laundromat FL to go "high efficiency" by using soft-mount so that they could have fast spin to provide high extracting force (say 300G or more)? It seems that these FL use a conventional boot which connects the outer tub to the cabinet and the...

Thomson TX898 at 220V 50Hz Thomson TX898 in HK is supplied at 220V 50Hz 15A circuit. So it could have a high power heater (say 2000-2500 watts) for heating washer water and for drying. It also has only one COLD inlet.

Will ask my son to confirm! I will email my son to look again to see if there are any other paddle-like objects besides the only one at the bottom.

If the LHD is for water-jets, then the RHD would be Hot Air Inlet for drying and the return could be through the circumferencial holes in the drum. Any thoughts? My son says: "FYI, a normal 40C "cotton" wash at 1300rpm for the Thomson TX898 takes 1hr 41min (LED display). If the "Eco" feature is...

Update The left hand side inlet is for water-jets (not Hot air). See Photo.

3rd photo Are these the Hot air inlet and return when used as dryer?

2nd photo Is this the only paddle?

Thomson TX is my son's new Euro-size FL washer/dryer in HK. It can wash 6 kg and dry 3kg. See 1st photo Apparently there is no paddle in the drum. See the next 2 photos.