Search results

Replaced the tub seal - have a leak at the band clamp I had to result to using a cold chisel to remove the spanner nut, but that worked out well. The mounting stem took a bit of effort(had to lock the transmission in place) and time however I was able to remove it. The inner tub was heavier...

Following directions Thank you, I have followed the directions provided and was trying to remove it in a clockwise direction however it would not loosen. I will end up using a cold chisel. If the mounting stem allen screw is stuck, I believe I have an old attachment(if I can find it) for the...

Started the project Pulled the agitator off, purchased a 3lb hammer(not a rubber mallet), used a cast metal spanner wrench and hit the spanner nut. Makes a heck of an echo each time you hit it. Unfortunately it is on extremely tight. Would probably go deaf before that would ever come off. I...

I really appreciate the help Thank you for the information;at least now I know what I might be getting into if I tackle this repair. I will start looking on-line at parts and take a closer look at the machine as I am a bit concerned at what I might find in a teardown when I get to the...

Sorry, I am new to this site and do not know how to get on the supersearchalator to do the search?? ALSO: Trying to figure out how to remove agitator as there are not and screws on the side of it. Thank you for taking the time to respond to my first message;much appreciated.

a black oil/grease is getting on on the clothes sometime during washing. It leaves several spatters of oil on the clothes which are very hard to remove. Is a transmission seal leaking? If so, how do I get instructions on how to repair it? Does it require special tools and how difficult is it...

Akronman , thank you. I will clean it out per your recommendation and seal the ends. If still an issue, I will adjust the screw to control the pressure/fill. For the heck of it, after replacing the motor I took the plastic start switch housing apart. There are 2 flat copper connectors that are...

Motor had to be replaced Figured out the motor switch was the problem a nd was told replacements are no longer sold. I purchased a new motor and after a bit of a struggle taking the pulley off, got it disassembled , the new motor in and the machine running. Thinking about buying some...

Maytag Washer Model A107A Series 03 Current Motor 2-1664-4 Model S59PXCLW -1900 1/3HP HZ60 Amp 6.9 Issue: Machine would fill and after filling timer would continue to move and you can hear humming noise at motor but motor does not engage and wash cycle will not start. Timer would continue...