Search results

Yep, I saw those diagrams too. Not very useful with "part #9" and no ordering information. So, I just need to get a wigwag complete kit (with plungers) . Thanks for the help

I did a lot of searching and found a lot of different part numbers and wasn't sure which to use. Hence my quest for help. From your link, my washer model is not listed as one of the compatible models for that part.

looking for part number for wig wag solenoid on whirlpool washer model number LHA7800N1.

Here's my update and report. Good news: Ran a couple of more tests, this time hands off and let the machine just plow through it cycles and everything is as it should be :) Bad news: If there is a problem still lingering I will have to wait to find it because everything is working. My...

Well, an interesting turn of events. I started a cycle, filled the tub and went into agitation cycle. I stopped the machine, unplugged and switched the wires on the wigwag. The machine went into spin cycle with a full tub of water ! YOWSA! I stopped the machine, unplugged and switched the...

I put the machine into spin cycle and depressed the lid switch several times while watching the left plunger. I saw no movement. ======================================================== I should also mention the wig wag was not moving during this test, if that makes a difference.

I took another look at the wig wag and I can see that the pin in the left side is still there. I checked the continuity of the wire from the lid switch back down to the left solenoid and it is good. I put the machine into spin cycle and depressed the lid switch several times while watching the...

Good tip on the model number color code. I did find a parts diagram for the "W" model. I did run a test on the short cycle. Good news, the machine is now agitating again. The right horizontal bar moves in and out. The wig wag is always wagging. :) The left horizontal bar is not moving and I...

thanks for the replies. Bad news: No problems found I checked continuity for the wires between the solenoids to the next connection up towards the timer control. No breaks were found and no frayed wires were found. I turned the pulley by hand and everything turns very easily without any...

I have a Whirlpool top-load washer, model number LHA7800N1, Imperial Seventy. Everywhere I've looked for parts or manuals online says this is not a valid number. I've tried using just LHA7800, but still no luck. Machine looks like the one here...

Hi, I recently pulled out my old GE wringer washer. the washer works, but the wringer does not. when I pulled the wringer up, there is no shaft or rod going down into the machine. How do I find my model number and where would I find a shaft? thanks

@ fool 123 The washer isn't compact. it's standard. it rinses quite well and you can use even less then the recommended amount of HE detergent. I find filling to Level 1 on the cap is too much for a medium load. If you are short like myself, you may need a stepping stool to reach clothes at the...

Sorry @ sears kid I see now you are talking about the Maytag Bravos! Sorry. My bad! I'm relieved too now that I see the new LG washer isn't being compared to the piece of crap Cabrio. haha

@ The Sears Kid Sears Kid: How is this new LG washer also known as the Whirlpool Cabrio which isn't the same maker? I know Maytag is owned by Whirpool but they don't own LG. I had the Cabrio. Broke down! Now own this LG and they don't run quite the same at all. Fool123: Check LG website and...