andrewinorlando
Well-known member
- Joined
- Oct 18, 2004
- Messages
- 1,392
Easy appliances are made and sold in Mexico now. There is a website somewhere that shows their line available there.
'62 Easy AUTOmatic trouble
- Thread starter gregm
- Start date
Help Support :
John, I do hear the "click" as you describe as the motor coasts to a stop and I don't smell anything burning. I am inclined to go with your thought that somehow, somewhere, the motor is not engaging with some part or parts in or as the motor connects to the tranny ............. I wonder if the timer plays any roll in telling the motor to engage or disengage with the tranny at any or many points ?? and if something is stuck in "neutral" due to a "timer" issue ?? I wonder if that is a possibility ?
Greg if you do hear the motor running and then a **click** when it slows do to a stop, the start switch is fine. Unfortuantely if that is the case there is probably a more serious problem. It could be that the rubber coupler has worn off, but finding a replacement for that might present a bit of a challenge. Keep us posted when get the motor off.
Greg if you do hear the motor running and then a **click** when it slows do to a stop, the start switch is fine. Unfortuantely if that is the case there is probably a more serious problem. It could be that the rubber coupler has worn off, but finding a replacement for that might present a bit of a challenge. Keep us posted when get the motor off.
front panel and top
well I tried to locate and/or feel for any screws at the bottom of the front panel or underneath that lip near the bottom of the front panel and can't find anything to "unscrew" as to take or get the front panel or top off ??? I hate to put this machine on its side, well I can't actually or oil will leak out of the tranny and the back access doesn't allow easy access to the motor where the motor is towards the front of the machine ........
well I tried to locate and/or feel for any screws at the bottom of the front panel or underneath that lip near the bottom of the front panel and can't find anything to "unscrew" as to take or get the front panel or top off ??? I hate to put this machine on its side, well I can't actually or oil will leak out of the tranny and the back access doesn't allow easy access to the motor where the motor is towards the front of the machine ........
EASY question
Was that machine EASY's last?
When did EASY officially disappear and does anyone have a pix of the (approx) final machine?
Was that machine EASY's last?
When did EASY officially disappear and does anyone have a pix of the (approx) final machine?
