Blackstone Tub Puller

[blackstone]

Anyone need this Blackstone tub puller? Used on the latest model Blackstones (902, etc.), with perforated tub and diecast tub mount. This puller has 2 bolts that go through the tub mount. Tightening the screw on top pulls up the tub/tub mount (hopefully). If you ever had to work on this problem, you know what I mean.

One part of this is missing, but the included piece of pipe should work. This puller was purchased directly from Blackstone Corp. for this specific purpose.

Rather heavy, so I would need to calculate shipping cost from Springfield, Mass.

 

[brisnat81]

Was it designed to pull the hub up and off the rusted centre shaft? That looks like it has some serious pulling power.

Luckily over here, Hoover went to stainless shafts by the early 80s

 

[blackstone]

Yes, it pulls the tub mount and tub, up the shaft. The tub mount is probably corroded.