A Great Incandescent Bulb, R.I.P.

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support AutomaticWasher.org:

Got to say I'm with John, toss them.  I had considered donating my old bulbs to GW or such, but on second thought felt the same - if I'm not going to use them to save energy why give them to others to use the energy I'm trying to save?

 

Plus, if folks around here are in desperate need of bulbs the utility company will give them a group of LEDs for free.
 
Hmmmmm, talk about disposing light bulbs, of their using destroying our environment, whereas what happens to the landfill receiving all that twisted metal of bases and filliments and broken glass?

Versus, incandescent hoards, of which I had amassed one, myself, even with a number of squiggly fluorescent lamps when they were mandated for lighting with energy consumption--but now, if only something would burn out!

The folks like me, craving more light that LED's can't deliver, nor in the form that old fashioned incandescents can do, if they're properly watted and well-made, and THOSE will fit light sockets in the lamp and light sockets we're still using, and least if all, our appliances...

And last of all, what does this solar set-up (as been cited) look like? We'd all like to know...

-- Dave
 
I'm not getting rid of them, any LEDs I have used don't last. I can't stand the awful color rendering of them either, I frankly believe that they fudge the CRI numbers on most of them because I have some old 60 CRI High Output flourescent fixtures that provide better quality of light than many LEDs. There is a massive difference between the living room which still is illuminated with 100 watt incandescent lamps and the kitchen which has LEDs. They are supposed to be the warmer color temperature, too but it doesn't matter, they still make everything look awful, even compared to an old CFL, let alone an incandescent.

I often head people say that this unreliability and color rendering is all a problem of Edison base retrofit lamps, and proper LED fixtures are the answer. In my garage we have four LED utility lights and one already failed, they aren't that bright either, only equivalent to one F40T12/HO flourescent tube, and there are two per fixture. They weren't cheap either, costing nearly $60 a piece. 1.75 years later, outside the warranty, of course one failed. Not to be out done, I tore it apart and found a bad solder connection on the 24v switch mode power supply. They potted one side of board to make it hard to service, strangely the component side so all the electrolytic capacitors would get hot and dry out. This failure rate will most definitely cost more than the electricity savings over flourescent, even the venerable old T12 type.

To summarize, I'm still not impressed with LEDs. I'm not opposed to CFLs though, they seem to produce better light quality, but they don't seem to hold up anything like the old incandescent bulbs do.

*The second picture is powering the LED strips directly off of my Sencore VA-48 video analyst, using its DC power supply function. As can be seen in the fourth picture after resoldering the bad connection, I depotted most of the board.

speedqueen-2019051115192201723_1.jpg

speedqueen-2019051115192201723_2.jpg

speedqueen-2019051115192201723_3.jpg

speedqueen-2019051115192201723_4.jpg

speedqueen-2019051115192201723_5.jpg
 
I have one.

The bulb just off camera in the first shot creating the bright spot at the bottom-right of the first picture is a 200 watt incandescent over my(cluttered) work bench.
 
I have gone thru I don't know how many GE,Sylvania LED and CFL bulbs that were made recently!One GE bulb went out with a "B--RR--AAAPP!-Blap!" and let out a puff of smoke.The socket voltage is 119V Feel these new lamps are a fire asafety hazard.Will take an older Inc bulb ANYTIME over the newer LED and CFL JUNK!!!!Feel the bases of the new bulbs and they run HOT!!!!This shouldn't be!!!!POOR DESIGN!!!!!!Found some of my older CFL bulbs and put them back to use!!!!At how this bulb situation is going may have to go back to lighting with candles and gas lamps!!!PITIFUL!!!!
 
At work I’m mainly using Philips and Osram, the sconces are using Cree, and the chandeliers have some Ecosmart candelabras as well. Philips and Osram have held up the best. Cree seems to only last a few years.
I noticed last time I was at Home Depot they started carrying only the filament style candelabra LED’s which have no power supply and run off straight AC which means they have 120hz flicker, which is visible to the naked eye. Not really liking the way LED lighting has been going but seems we’re kinda getting backed into a corner here, I’ve stopped adopting them at home and continue to use halogen or incandescent where there’s a dimmer. Really can’t beat that quality of light and dimming
 
John, I get it

John,
I completely understand where you’re coming from. I’m using LED all over this house and The Pines. I have filament, dimmable LEDs in our chandelier. They might not be quite as cozy but a reasonable trade out for the energy savings. I have a bunch of 15 watt incandescent bulbs I’m not using. You’ve just given me permission to toss them. Thanks.

I think our house in town is a prime candidate for solar panels on the roof, but let one volt get back to the grid and Alabama Power slaps on outrageous service charges and requires home owners to purchase special expensive meters. I have friends who are taking Alabama Power to court as I type...

Christmas lights are my incandescent weakness although I’m probably going to switch out the front porch garland lights next year. Just wish they’d make the LED Christmas lights from glass. The plastic ones look so...

Only tangentially related, I bought a Ouija board at an estate sale about a year ago. I planned to sell it on eBay, but I couldn’t. I’m Christian but not extreme or superstitious, but the board felt wrong. I had this strong sense that it was a doorway that, once open, would invite evil to come through. I bought it and burned it to take it out of circulation.

Sarah
 
100w bulbs

got 2 4-paks of vintage N.O.S. 100w bulbs today first pack was Philips~1990,and the other was 1980s GE.i'll use these out in the chicken coop during the winter when the heat given off will be a benefit.Also got a bunch of used par 30 lamps and some vintage,~2010,Cree LED bulbs-the ones that have the finned collar and when illuminated look exactly like an ILB :)-These are some of my fave "vintage"LEDs from back when LED bulbs were a specialty item and not cheapened up consumer commodity item like most LEDs of the last few years.
 
Back
Top