Aeg appliance issues!

[ian_p61]

Hi all,

It seems everything is breaking!

Recently I noticed that my aeg 40760 dishwasher has stopped heating so I replaced the inline element and ran a cycle - it is still not heating!!
What do I do??

Thanks

Also I got given an aeg 888360 washing machine which I was told has a c6 error - what does this mean?
Thanks

 

[launderess]

C6 error code for Aeg Lavamat

Domestic Appliance Help Forums - UK Whitegoods Domestic Appliance Help And Support Forums

Get completely free help and advice with appliance faults, diagnostics and spare parts from professional trade appliance repairers

www.ukwhitegoods.co.uk

 

[ian_p61]

Thanks!

I will check that tomorrow! - just a quick question where are the switches and sensors located?

Also with the dishwasher could it buy a temperature sensor or thermostat? - if so can i reset?

 

[ronhic]

It could be cracked solder

Being part of  Electrolux, it is probable that it uses a similar timer to the Dishlex machines.

 

My DX302 also stopped heating water earlier this year and the fault turned out to be as simple as cracked solder under the small square/rectangle electronic relay. A touch of solder at each connection on this and voila - solved!

how do you fix a dishlex dx302 ? 🗹 Answered | how to mend it .com - Mend Dishlex dishwashers

how do you fix a dishlex dx302 ? - Find out how to mend it, for free.

www.howtomendit.com

 

[ian_p61]

Dishwasher!

I opened the board up and yes It needs some soldering!

Also with the washing machine I get the c6 error during it filling???

Thanks all

 

[ian_p61]

The machine also gets c6 just before the final spin-3 minutes left!

 

[ronhic]

Ian

Is the dishwasher working correctly now?

 

I'd love to know how many Dishlex 302 et.al. have been junked because the service person quoted $200 for the part and $160 labor (callout fee plus total 45 minutes)?

 

[ian_p61]

Yes

The dishwasher is now working! Yay -thanks Ronhic!

I was not even sure it my solder would work but the machine goes great again!

Btw I did a diagnosis on the aeg washing machine (fault check mode) and fault cam up in woollens 40 - the c6 one , does this mean any thing in particular??

Thanks all

 

[ronhic]

Ok...try this one

This is the last entry in the link.

 

'<span class="postbody">Just fixed my AEG washing machine with C6 fault. Changed wtare valve and sorted electrical distribution box which had become unclipped. </span>

<span class="postbody">
Holding down Prewash and Stain buttons whilst turning programme knob to short spin cleared the fault code and now all fine'</span>

AEG LAVAMAT 88730 Washing Machine--Error C6

Does anyone know the meaning of error code C6 for above washing machine? My AEG washing machine displays this error code in the middle of the wash cycle and stops working with the 'main wash and rinse lights' flashing. I have to press the START button to complete the wash cycle. Would be...

www.diynot.com