Are these Late 60s Maytags?

[jamesclarke]

These are coming up for sale at an estate sale soon and my wife actually said they look nice and would work for her.

If they are in fact working, what would be a fair price to pay for the pair?

Any other info would be great.

 

[appliguy]

these Maytag’s date from 1975

1975 was the first year Maytag used gold pain on the lower half of the control panels and it was the last year they made the Halo of Heat Dryer with the lint trap in the back of the drum. In 1976 Maytag introduced their Stream of Heat Dryers that had the lint trap right inside the door and the bigger dryer door. Maytag continued to make the center dial control washers and dryer until 1980 when the redesigned the control panel with the dials on the right side and fake walnut looking panels…PAT COFFEY

 

[rp2813]

I can't say for certain, but that may be an extra-large tub washer.  It appears to have four water level selections instead of three, two speed options and three wash temperature options.  Someone else here can confirm the capacity, or you can confirm it visually by counting the slots down the side of the agitator.  There will be four instead of three if it's an extra-large capacity tub.

 

I can't be sure about the dryer.  I'm guessing it has both timed and automatic cycles.  It does not appear to have any heat options, but those may be automatically controlled by the cycle selected.

 

Although these machines were produced in 1975, they are the same design as those produced in the latter half of the '60s except for the "crystal" timer knobs and gold trim on the lower portion of the consoles.  Machines just a couple of years older had chrome knobs and a silver-blue trim instead of gold.

 

These machines aren't top of the line.  If they were, they would have florescent-lit white glass consoles.  Mechanically they're built to the same high standards as top-of-the line models.

 

My cosmetic concern would be that if those stickers on the panels are removed, they could take the paint with them.

 

[hippiedoll]

it looks like....

the washer is an x-large capacity washtub. and by the 3 water temperature buttons on would guess it to be an A606?? i'm not positive but that's what i would guess the washer to be. as for the dryer, i have no clue??

but i do have a question, do my eyes decieve me?? or does it look like both the washer & dryer have the shaded edged painting. which would make these the "harvest gold" color and not the plain "gold" color, like my washer. or am i wrong???

 

[goatfarmer]

At the risk of upsetting a few, I would say somewhere in the $100.00 range for the pair is fair, providing they work properly.

 

[kenmore71]

That washer is for certain a 1975-ish A606.  Looking at the dial, the dryer appears to be a DE407.

 

[daveamkrayoguy]

And the stickers are probably a same-to-newer (though likely not more than 30-yr.-old) vintage...

-- Dave

 

[danemodsandy]

Very Okay Machines....

....But if you'll be patient, a pair of top-of-the-line 806s will turn up and be real stars of your vintage collection.

806s had it all - the most cycles, the lighted consoles, the large washer capacity and the lighted dryer drum. Earlier washers even have a lighted tub.

Your wife will enjoy any Maytag pair in good working order, though - as has been pointed out, Maytag did not reserve high quality standards for its more expensive machines. Every Maytag was built to the same quality standard - the difference was in the features.

If you're in need of machines right away, go ahead and get these and learn how to maintain and repair Maytags on them. You can always "trade up" and resell these later; it's usually not too hard to get a reasonable investment back out of vintage Maytags.

 

[rp2813]

I agree with the figure of $100 for the pair, or a little more if they're in exceptional condition.  If you have to bargain for them, you should advise that they're not top of the line machines.   If they were, they'd have the lit panels, the washer would have more buttons for temperatures and speeds, and the dryer would have an "Electronic Control" timer dial.

 

Maybe those stickers on the washer are actually magnets.  The "Heavy Duty" sticker on the dryer was put there either by Maytag or the appliance dealer to help with sales.  I wouldn't try to remove that one.

 

[appnut]

Mikey, the washer is next to top of the line--A606. The dryer is 3rd from TOL. It does have automatic dry control feature as well as timed dry. Very respectable pair. The water temperature buttons would yield a Hot wash & warm rinse; warm wash & cold rinse; and finally cold wash & rinse. It is the largest capacity washer Maytag offered. And with the warm water button pushed, that means they aren't a slimy victim of cold water only washing.

 

[hippiedoll]

i've got a question here.....

i was just wondering, did any model of maytag center dial washers offer a "2nd rinse" option??

something i was wondering today....

 

[Gilles8000]

2nd Rinse on Maytags with center dial

Hippiedoll

My mom had a Maytag A208 washer. I remember the manual saying that the only to get a 2nd rinse was to use the Permanent Press Cycle

The washer would agigate on either Gentle or Regular speed.

After the wash the washer would pause for 1 minute

Then it would Spin and partial drain on Regular spin speed, fill do one more partial drain. Then it would do this:

Fill to level selected.
Pause
Deep Rinse for 1 minute
Pause
Spin and Drain at Regular Spin Speed which lasted for 2 minutes.
Fill
Deep Rinse
Pause
Spin and Drain at Regular spin Speed again to 618 RPM.
Damp Sry
Off

During the Permanent Press Cycle all Rinses are of cold water.

Another thing the model A806 does not recommend the gentle spin on Permanent Press cause the first full spin would drain out the water and then spin for 30-45 seconds on first spin on that cycle. Keep in mind that the Gentle spin would not remove as much detergent as the Gentle Action and Gentle spin speed in Permanent Press.

So stick with Gentle or Regular Action in Permanent Press on the A206, A207, A208, A606,A608, or the A806.

The other models use single speed Regular Action and Spin on the Permanent Press.

Gilles

 

[danemodsandy]

One Other Thought:

If you and your wife like Harvest Gold and want to live with it, that's great.

However, it is not a very popular color now, so I would keep that in mind. It will limit resale just a little bit if you try to "trade up."

 

[beekeyknee]

Hi Mikey,

Don't want to spoil the fun here. Others that have posted here have hinted at but not actually stated that the dryer is a Halo of Heat type machine. They're nice machines, but they're harder to work on than Stream of Heat dryers and parts are becoming hard to find. If you're really a good DIY type guy, have perseverance and the machines are low mileage, it might turn out fine. But if you're not and they're not, it could turn into a headache for you. And some of the same could apply to the washer. Machines of this age often require some fairly intensive restoration to work properly and last. Don't get me wrong. I love to see any vintage machines saved, but don't bite off more than you can chew. Good luck to you.

Brian

 

[hippiedoll]

gilles8000...

thank you so much for your reply & for explaining the "PERMANENT PRESS" cycle. and also for letting me know that, in your mom's A208 owner's manual, it said, the only way to get a 2nd rinse option was to use the "PERMANENT PRESS" cycle. i will definitely keep that in mind, the next time i wash a load of towels, as i always like to do a 2nd rinse on the towels to make sure that all the soap is rinsed out all the way.

now i feel like grabbing towels just to watch the "PERMANENT PRESS" cycle in action.
hm hm hm......

thank you again for your reply gilles8000, it was much appreciated.

lovingly,
hippiedoll ;o)
peace...

 

[combo52]

Perment Press Cycle On MT 06 Washers

While rinsing is improved somewhat on the PP cycle it is no where as good as an actual 2nd deep rinse and if you are washing heavy items like towels the longer final spin on the regular is much better.

It was stupid that MT used a fast spin on the PP cycle, I think that they must have the only washer manufacturer that ever did this and if you compared the way shirts emerged form being washed in MTs PP cycle to those washed in a BD WP products PP of the same time period the difference was noticeable as the shirts came out.

The best way to get a 2nd rinse in an 06 MT is to set the timer back for another rinse on the regular cycle.

 

[DADoES]

 
Or catch it during the 1st rinse agitation, reset the timer to a couple minutes in the wash phase ... it'll drain/spin (and spray-rinse), rinse again, final spin & shut off.

 

[rp2813]

John, what about 806 models?  Don't they have selector buttons for wash and spin speeds?  Does the cycle selection of Permanent Press override the speed buttons?

 

[hippiedoll]

manual 2nd rinse.....

yeah, that's what i've been doing all along, letting the regular wash cycle run through and then when it's finished, i'll reset the timer onto the rinsing part of the regular cycle.

thank you all for your responses & inputs. i really do appreciate it. but i wonder why maytag didn't give a 2nd rinse option?
hmmmmm???