stevet
Well-known member
NSB3
hard to read data plate
hard to read data plate
Beautiful 1967 Frigidaire Rollermatic in New Smryna Beach, Fl
- Thread starter Unimatic1140
- Start date
Help Support :
stevet
Well-known member
more
Top control box
Top control box
stevet
Well-known member
got more pics
will post the money shot in a little while..I know you are all wating to see it!
will post the money shot in a little while..I know you are all wating to see it!
mrb627
Well-known member
Nice
That machine is nice. I would pay 500 for it. Wish it was closer!
Malcolm
That machine is nice. I would pay 500 for it. Wish it was closer!
Malcolm
I must say, it apears to be more minty than any I've seen. There is a [COLOR=#ff0000; text-decoration: underline]Lot[/COLOR] of life left in that machine!
stevet
Well-known member
Minty for sure!
There is absolutely no rust or even dust under the machine. I really wish I had the time to see and hear it run but had to get back to work.
This is the only blemish on the machine and a little bit less on the opposite side of the control panel. Cam from boxes stored on top of the unit.
There is absolutely no rust or even dust under the machine. I really wish I had the time to see and hear it run but had to get back to work.
This is the only blemish on the machine and a little bit less on the opposite side of the control panel. Cam from boxes stored on top of the unit.
stevet
Well-known member
more to see!
2 left!
2 left!
stevet
Well-known member
MONEY SHOT!
Absolutely pristine, everyone!
Even the screws on the bottom are rust free! But I dont think I caught them in the shot!
Absolutely pristine, everyone!
Even the screws on the bottom are rust free! But I dont think I caught them in the shot!
stevet
Well-known member
Let's make a deal!
Malcolm,
Make and offer and if you get it, have Dale the owner hold it til the spring and see if Eddie, toploader55 can pick it up and meet you on his way back from his yearly trip to Florida!
I might be able to get a truck and get it to my house and he can get it when he stops by me too.
Malcolm,
Make and offer and if you get it, have Dale the owner hold it til the spring and see if Eddie, toploader55 can pick it up and meet you on his way back from his yearly trip to Florida!
I might be able to get a truck and get it to my house and he can get it when he stops by me too.
mickeyd
Well-known member
What a
perfectly beautiful washing machine, and the shots are wonderful. It is just begging to belong to Aworg, like a gorgeous white short-haired puppy in the window.
perfectly beautiful washing machine, and the shots are wonderful. It is just begging to belong to Aworg, like a gorgeous white short-haired puppy in the window.
mrb627
Well-known member
Steve
If you want to purchase the machine, then keep and use it for a while, I will agree to purchase it from you when it is ready to move to ATL. We can work out the specifics offline, if you like.
Malcolm
If you want to purchase the machine, then keep and use it for a while, I will agree to purchase it from you when it is ready to move to ATL. We can work out the specifics offline, if you like.
Malcolm
I'm glad you guys
are going to work on getting this machine. A few words of advice on it. I would remove the top and clean around the ring of the outer tub because that area gets dirty sometimes and can't be seen without taking the top off. Those rubbed areas on top of the control panel can be easily touched up using a white paint marker. Hope this will be helpful to you all.
are going to work on getting this machine. A few words of advice on it. I would remove the top and clean around the ring of the outer tub because that area gets dirty sometimes and can't be seen without taking the top off. Those rubbed areas on top of the control panel can be easily touched up using a white paint marker. Hope this will be helpful to you all.
Great shots Steve!
Machine has gone up in value! I can see either it was a lo-use machine or a non stressed machine! There are no scuffing or rub marks on the spin and agitate rollers from the urethane inter-rollers!
If this had been overloaded or stressed you would see burn marks on the aluminum rollers.
Add $200 bucks to my estimate!
jet
Machine has gone up in value! I can see either it was a lo-use machine or a non stressed machine! There are no scuffing or rub marks on the spin and agitate rollers from the urethane inter-rollers!
If this had been overloaded or stressed you would see burn marks on the aluminum rollers.
Add $200 bucks to my estimate!
jet
toploader55
Well-known member
Thanks Steve...
And How do you know if the Back of my Truck will be empty on the way back ???
LOL. I might hit a Lucky Streak while I'm in Florida or on my way down. I'd be glad to help out. Eddie
And How do you know if the Back of my Truck will be empty on the way back ???
LOL. I might hit a Lucky Streak while I'm in Florida or on my way down. I'd be glad to help out. Eddie
I declare this machine a...
Creampuff!
Creampuff!
bendixmark
Well-known member
Mint Frigidaire
I bought that machine yesterday for the 500 and am sending Microship to go get it for me.I talked to Dale and it is a once a week machine until 1989 by his grandmother.
I bought that machine yesterday for the 500 and am sending Microship to go get it for me.I talked to Dale and it is a once a week machine until 1989 by his grandmother.
mrb627
Well-known member
Good...
I am sure glad that someone in the group got this machine. I would have liked to have it, but truthfully, it wouldn't have been connected fulltime and that would have been a waste.
I sure hope you can take some high-def videos of this machine and archive to Youtube.
I have thought about putting together a dvd of my SQ machines and uploading the iso image to a file sharing site so anyone could download and burn their own copy.
Malcolm
I am sure glad that someone in the group got this machine. I would have liked to have it, but truthfully, it wouldn't have been connected fulltime and that would have been a waste.
I sure hope you can take some high-def videos of this machine and archive to Youtube.
I have thought about putting together a dvd of my SQ machines and uploading the iso image to a file sharing site so anyone could download and burn their own copy.
Malcolm
1967 FRIGIDARE WASHER
Congratulations Mark you should enjoy this washer and from what I can tell it is a very fair price to pay for this machine. There may not be another machine in this good a condition anywhere and you can't put a price on something like this.
Congratulations Mark you should enjoy this washer and from what I can tell it is a very fair price to pay for this machine. There may not be another machine in this good a condition anywhere and you can't put a price on something like this.
Yes, Congratulations
I'm glad to know it has a good home to go to, sounds like a "granny special"
I'm glad to know it has a good home to go to, sounds like a "granny special"
rollermatic
Well-known member
congrats!
as my name says i love rollermatics! have rebuilt 3, working on #4 this year. your's looks like it won't need much attention at all. water bellows are still available and oil too if you ever need them, although only one of the 4 i have torn down have needed a new bellows. they will hold up fine if no pins or nails etc. get into them. and tub seals seem to last forever too (at least on mine) cause on a rollermatic the water level never gets high enough in the outer tub to cover the main tub seal anyway. so they are not subject to the extent of corrosion and wear that a 1-18 or other perforated tub seal would endure on a constant basis.
enjoy it and lots of pics please!
as my name says i love rollermatics! have rebuilt 3, working on #4 this year. your's looks like it won't need much attention at all. water bellows are still available and oil too if you ever need them, although only one of the 4 i have torn down have needed a new bellows. they will hold up fine if no pins or nails etc. get into them. and tub seals seem to last forever too (at least on mine) cause on a rollermatic the water level never gets high enough in the outer tub to cover the main tub seal anyway. so they are not subject to the extent of corrosion and wear that a 1-18 or other perforated tub seal would endure on a constant basis.
enjoy it and lots of pics please!
Similar threads
