Bosch Surprise

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

At bLowe's the other day I tried every major DW manufacturer's lower rack in the Bosch. And I'll be damned if they weren't all the slighest bit too wide to fit in there! DAYUM!

Is it so difficult to add more rows of (left-right running) tines between the front and rear of the lower rack?
 
Try a Miele bottom rack. You may have to go to an appliance store that has Miele and Bosch. Maybe PC Richards. If the Miele fits and you like it, I am sure you can order from Miele.

Ray
 
parunner58:

I like how you loaded your SHX46. Do you always have your silverware basket across the front like that? On the top, I always put my smallest glasses on the right so I can fold down the shelf and use it for utensels.
 
No, I usually have it together and in the middle. but i like that you can place it anywhere. somtimes if there is not much silverware, I use just one half. Due to the spacing between the tines on the upper rack, our juice glasses get the row second from the right. We do not have any mugs or glasses that are short enough to fit under the fold down cup rack. I now have a knife rack that fits on the top of the left side of the upper rack and put the longer knives and untensils that go in the DW
 
Loved our Bosch

We had one installed in the UK in 2002 when we renovated our kitchen. Cycle times are a tad longer than expected, but then it is cold water connect only. I prefer to be concerned about how clean things are and how much impact the machine has on the items in it (cloudiness, 'scratches' etc)

I think like all things, you do get used to how to get the most out of an appliance. Our current dishwasher, and the Bosch for that matter, is no good with powdered detergent. Tablets were the only way to go and I do dislike the detergent lid in the Bosch.

The same goes for loading. I never used the knife rack that came with the machine as we too didn't have mugs/glasses that would fit underneath it but I do like the left to right layout of the bottom basket mainly because Australian made dishwashers had the same set up.....familiarity does wonders for getting the most out of something....

Still, until the *%$#@ machine we have now dies, I am not prepared to spend the money to update....
 
not happy with my bosch

im on my second bosch.. the first one i replaced with a kenmore elite because the bosch never cleaned my dishes as well as the whirlpool i used to have.. when the cycle is complete, and i open the door, there is a strong odor of dirty dish smell that comes out... little did i know that the elite that i bought was also a bosch!!! same issue..
waiting for a good deal on a whirlpool so i can reason to toss out this machine this maching currently that i have cost 900 dollars... a waste of money, but no other choice
i just dont understand what the problem is.. does anyone have any suggestions
 
on the subject of bosch....

i forgot to mention that i also have a bosch oven... wow it is a terrific oven- the best i ever owned.
 
My 2001 model Bosch was one of their two BOL machines in the Integra (controls in door rim) line. When I made my purchase, the models had only been placed in the market one week earlier. As a result, I had to order them sight unseen from the appliance store. They had a book of the specs which turned out to be wrong, but for me it was a lucky mistake.

The two BOL machines in the Integra line differed in only one respect: both had Power Scrub Plus and Normal Wash cycles. But one had Rinse/Hold as the third cycle and one had Quick Wash as the third cycle. I thought I was buying the Rinse/Hold model (as per the specs book) but instead the machine turned out to have Quick Wash instead. I called the dealer and they said to try it, if I didn't like it they would let me exchange for a model with Rinse/Hold.

Turns out I was better off with Quick Wash. It can wash lightly soiled dishes in 30 minutes and they are pretty dry. Since the other two cycles wash so thoroughly, I never pre rinse, and week old dried on oatmeal or pasta sauce comes clean off the dishes.

As a result, there is no reason for Rinse/Hold as it was with my old GE dishwasher, where I had to run Rinse/Hold if I had less than a full load, wasteful of water as it was. If I didn't use Rinse/Hold, then I really had to prerinse the dishes very well. When you have a machine that cleans as well as a Bosch, you really don't need Rinse/Hold. If my machine broke beyond repair tomorrow, I would buy another model just like this one (or maybe save $150 by getting the one with same features but controls in the front....but I would avoid the one with the plastic bottom, who knows if it will leak?)

I have the same filter and never have problems with it. I rinse out the filter every three months or so if I remember. No odor or food or objects trapped there, ever.
 
strong odor of dirty dish smell ..

I too had a problem with the Bosch dishwasher that smells really bad. I think I figured out that it was the filter,that is not self cleaning. It was full of white sludge (really gross). Once I got that all cleaned up it seemed to be better.

Jim

1-21-2009-22-54-35--spankomatic.jpg
 
cycles...

Our current machine does allow a HUGE variation in cycles.

Firstly, we can choose upper or lower basket wash/rinse

...then we can choose to have the prewash on some cycles or switch it off.

...on cycles that dry, we can have either the dryer off or on 1 of 3 drying options...none of which work well....

...we have cycle temperatures from 40-70c....

Unfortunately, beyond playing with the dryer on/off and turning the prewash on/off (if on that cycle) or using the upper/lower basket option, that is as far as it goes....

Personally, we use programme 4....60c, no prewash, no drying 68min...excellent results

...but I still hate the machine for its 'E7' message which requires a service call.....
 
re: dirty dish odor

I was getting the dirty dish odor in my Bosch, with the Kirkland brand powder. When I switched to Cascade powder it got a lot better. And it seems to have gone away entirely with the Quick 30 minute wash cycle. Why, I don't know. Maybe it's because I'm adding more powder to compensate for the Quick cycle, and it was a lack of DW powder that was the cause of the problem in the first place.

Keeping the filters clean probably helps as well, but generally they aren't too bad.
 
Kinda cool to see the differences between a "USA-Model" and a European one.. I'm glad that we don't have the horrible USA racks though!

This is the (european) Siemens dishwasher. As you probably know, Bosch and Siemens are the same.. I love the top rack!

1-22-2009-04-04-59--Wiljan.jpg
 
I do like how my bosch cleans. I've thrown some pretty nasty suff at it in the past couple of years, and it always seems to get everything clean. Never had a problem with odor or anything, just really don't like the racking. I'm use to having that open space on the left side of the bottom rack so you can stand a baking dish, or pan on it's side. Not to crazy about the right side on the upper rack either. The rows are narrow, and most glasses have to go over the tines, where as i was always taught that glasses should not be over tines. If My SHX46 had the upper rack of WilJan's It would be sooooooo much better.

parunner58:
I'm always looking to maximise my loading in my bosch. I can get alot into it (i've posted pic before in bob load threads) so just wanted to know that answer. I do split my silverware basket like you did in your pic, when I wash a load of nothing but pots and pans with utinsels.
 
Love how our Siemens washes!

The lower wash arm throws it's water all the way up to the top of the tub (and it could reach further). If loaded properly, our dishwasher wouldn't even need an upper spray arm. I sometimes put small items in the cutlery basket (with other cutlery and the cover closed) only to find them in the filter afterwards.
 
Huh, thanks Gary. I haven't had a problem with my Bosch, but I'll give them a call to see what if anything needs to be done.

Turns out mine is included in the recall. I called Bosch and was given a reference number to give to Sears so they can come out and fix it.

Not sure what to expect from Sears repair, though. Since the DW has operated without any problems for the past five years or so, I'm thinking it's been pretty safe, but I'll err on the side of caution on this one.

The affected module is apparently in the control panel.
 
Heh heh. Well, they don't want me to use the dishwasher until the recall repair is made. But considering that it's been running fine for five years, and the repair won't be happening for another two to three weeks, I'm using it as usual. Just not when I'm sleeping or out of the home. And if it starts to flame out I have about four Hobart KA's waiting in the wings, anxious to show how they do it ;-).
 

Latest posts

Back
Top